Honeywell Technologies GLD Series Metal Roller Limit Switch, DPST, IP66, Fibreglass Reinforced Thermoplastic Housing,

N° de stock RS:: 311-2279
Référence fabricant:: GLDB06A1B
Fabricant:: Honeywell

Honeywell Technologies GLD Series Metal Roller Limit Switch, DPST, IP66, Fibreglass Reinforced Thermoplastic Housing,

Sous-total (1 unité)*

93,01 €

(TVA exclue)

112,54 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

38 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 25 unité(s) expédiée(s) à partir du 19 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	93,01 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2279
Référence fabricant:: GLDB06A1B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Metal Roller
	IP Rating	IP66
	Contact Configuration	DPST
	Housing Material	Fibreglass Reinforced Thermoplastic
	Contact Type	Slow Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLD
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	85°C
	Standards/Approvals	CSA, CE, UL, CCC
	Width	30.5mm
	Length	68.5mm
	Depth	26.35mm
	Hazardous Area Certification	No
	Operating Force	0.11Nm
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Metal Roller
	IP Rating IP66
	Contact Configuration DPST
	Housing Material Fibreglass Reinforced Thermoplastic
	Contact Type Slow Action
	Switching Current 6A
	Terminal Type Screw
	Series GLD
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 85°C
	Standards/Approvals CSA, CE, UL, CCC
	Width 30.5mm
	Length 68.5mm
	Depth 26.35mm
	Hazardous Area Certification No
	Operating Force 0.11Nm
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles

Pays d'origine :: GB

Honeywell GLD Series Limit Switch, Metal Roller Actuator, IP66 - GLDB06A1B

This limit switch is a Compact mechanical position sensor designed for industrial automation and control systems. It detects actuations via a metal roller actuator and is intended for installation in harsh environments where a sealed enclosure and reliable switching are required. The device connects to control circuitry via screw terminals and accepts a standard PG13.5 conduit entry for wiring.

Features and Benefits:

• Metal roller actuator reduces wear and enables consistent actuation force
• DPST slow-action contacts provide controlled switching behaviour under load
• Rated switching current 6A to handle moderate control circuits
• Operational temperature range -40 to 85 °C for wide thermal conditions
• Fibreglass-reinforced thermoplastic housing delivers impact and corrosion resistance
• Mechanical endurance rated to 10 000 000 cycles for long service intervals

Applications

• Suitable for end-of-travel detection on conveyor equipment
• Ideal for limit sensing on industrial valves and actuators
• Used with motor starters for safety interlock switching
• Can be used for position feedback in packaging machinery
• Used for control panel input via PG13.5 conduit installations

What approvals does the device carry for integration in electrical systems?

It holds internationally recognised approvals from CSA, CE, UL and CCC, enabling use where those standards are required.

How is the unit mounted and wired in a control panel?

The enclosure provides a PG13.5 conduit entry for cable glands and internal screw terminals for secure conductor connection.

What electrical voltages can the contacts switch for AC and DC circuits?

The contacts are specified for switching up to 240V AC at rated current and up to 250V DC for DC loads.

How does the construction support ingress protection in harsh environments?

The housing material and sealing achieve an IP66 rating, offering protection against dust ingress and powerful water jets.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.