Honeywell GLD Series Rod Limit Switch, 1 NC/1 NO, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 6A

N° de stock RS:: 308-1901
Référence fabricant:: GLDB01A4J
Fabricant:: Honeywell

Honeywell GLD Series Rod Limit Switch, 1 NC/1 NO, IP66, Fibreglass Reinforced Thermoplastic Housing, 240V ac, 6A

Sous-total (1 unité)*

115,30 €

(TVA exclue)

139,51 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

34 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 60 unité(s) expédiée(s) à partir du 31 août 2026
Plus 60 unité(s) expédiée(s) à partir du 28 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	115,30 €

*Prix donné à titre indicatif

N° de stock RS:: 308-1901
Référence fabricant:: GLDB01A4J
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Rod
	IP Rating	IP66
	Contact Configuration	1 NC/1 NO
	Housing Material	Fibreglass Reinforced Thermoplastic
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLD
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	85°C
	Width	30.5mm
	Standards/Approvals	CCC, CE, CSA, UL
	Length	68.5mm
	Depth	26.35mm
	Hazardous Area Certification	No
	Operating Force	0.12N
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Rod
	IP Rating IP66
	Contact Configuration 1 NC/1 NO
	Housing Material Fibreglass Reinforced Thermoplastic
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLD
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 85°C
	Width 30.5mm
	Standards/Approvals CCC, CE, CSA, UL
	Length 68.5mm
	Depth 26.35mm
	Hazardous Area Certification No
	Operating Force 0.12N
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLD Series Limit Switch, IP66, 6A Switching Current - GLDB01A4J

This limit switch is a Compact electromechanical device designed to detect and control position and motion in industrial systems. It uses a rod-type actuator to provide discrete switching for control circuits, suitable for harsh environments where a sealed enclosure and straightforward electrical connections are required.

Features and Benefits:

• IP66 rated enclosure prevents dust ingress and heavy water jets
• Fibreglass-reinforced thermoplastic housing increases chemical resistance
• Snap-action contacts deliver quick, reliable switching response
• 1NC/1NO contact arrangement enables versatile control logic
• Supports 240V AC switching at 6A for mains control circuits
• Mechanical life of 10,000,000 cycles minimises maintenance intervals

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for safety interlock feedback on access panels
• Used with motor starters for limit sensing in hoists and winches
• Can be used for position sensing in packaging machinery
• Used for status feedback in automated assembly stations

What temperature range can it operate within?

It functions across −40°C to 85°C, allowing use in cold stores and warm plant rooms.

How are electrical connections made?

Wiring is secured via screw terminals and routed through a PG13.5 conduit entry.

Which approvals support installation in regulated installations?

It holds CCC, CE, CSA and UL recognitions for use in multiple jurisdictions.

What type of actuation force is required to operate the switch?

The actuator requires an operating force of 0.12 N for reliable actuation.

How does contact switching perform on DC supplies?

It is rated for switching up to 250V DC, enabling control of DC circuits within that limit.

Approvals

UL/ UL listed for Canada

Warning

GLC and GLD limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.