Honeywell GLE Series Nylon Roller Limit Switch, DPST, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

N° de stock RS:: 311-2342
Référence fabricant:: GLEB06A2B
Fabricant:: Honeywell

Honeywell GLE Series Nylon Roller Limit Switch, DPST, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

Sous-total (1 unité)*

176,73 €

(TVA exclue)

213,84 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	176,73 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2342
Référence fabricant:: GLEB06A2B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Nylon Roller
	Contact Configuration	DPST
	IP Rating	IP67
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Slow Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLE
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Length	139mm
	Standards/Approvals	CSA, CCC, CE, UL
	Width	65mm
	Depth	44.2mm
	Hazardous Area Certification	No
	Operating Force	0.11Nm
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Nylon Roller
	Contact Configuration DPST
	IP Rating IP67
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Slow Action
	Switching Current 6A
	Terminal Type Screw
	Series GLE
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Length 139mm
	Standards/Approvals CSA, CCC, CE, UL
	Width 65mm
	Depth 44.2mm
	Hazardous Area Certification No
	Operating Force 0.11Nm
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, 6A Switching Current, IP67 - GLEB06A2B

This limit switch is a Compact mechanical device used to detect position changes and actuate control circuits in industrial systems. It is designed for reliable signalling in equipment where a rolling actuator is required and where environmental sealing is essential for continued operation.

Features and Benefits:

• Die-cast zinc housing provides robust environmental protection and durability
• Nylon roller actuator reduces wear and enables smooth mechanical engagement
• IP67 rating permits operation in wet and dusty conditions
• DPST slow-action contacts support straightforward circuit switching
• Rated switching current of 6A allows moderate load control without additional relays
• Mechanical life of 10 million cycles minimises replacement frequency

Applications

• Suitable for end-of-travel detection on conveyor systems
• Ideal for position sensing in packaging machinery
• Used with valve actuation assemblies requiring positive open/close signalling
• Can be used for limit detection in industrial door and gate systems

How is the switch wired into control panels?

Terminations use screw terminals that accept standard control wiring and permit secure connections for AC or DC circuits.

What conduit provisions exist for installation?

A PG13.5 conduit entry is provided to route cable glands or conduit fittings while maintaining enclosure integrity.

What temperatures can the device tolerate during operation?

It operates across a wide thermal range from −40 °C up to 85 °C to suit cold-room or warm-process environments.

How sensitive is the actuator to applied force?

The required operating torque is 0.11 N·m, enabling activation with low mechanical effort while preventing nuisance trips.

Which voltages can the contacts switch?

The contacts are specified for switching at AC 240V and DC 250V to accommodate common control and signalling voltages.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.