Honeywell GLE Series Coil Spring Limit Switch, DPDT, IP66, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

N° de stock RS:: 186-8481
Numéro d'article Distrelec:: 303-44-331
Référence fabricant:: GLEB01E7B
Fabricant:: Honeywell

Honeywell GLE Series Coil Spring Limit Switch, DPDT, IP66, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

Sous-total (1 unité)*

191,15 €

(TVA exclue)

231,29 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

24 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 27 unité(s) expédiée(s) à partir du 28 septembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	191,15 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8481
Numéro d'article Distrelec:: 303-44-331
Référence fabricant:: GLEB01E7B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Coil Spring
	IP Rating	IP66
	Contact Configuration	DPDT
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLE
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	85°C
	Standards/Approvals	UL, CSA, CE, CCC
	Depth	30mm
	Length	189mm
	Width	65mm
	Hazardous Area Certification	No
	Operating Force	1.3N
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Coil Spring
	IP Rating IP66
	Contact Configuration DPDT
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLE
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 85°C
	Standards/Approvals UL, CSA, CE, CCC
	Depth 30mm
	Length 189mm
	Width 65mm
	Hazardous Area Certification No
	Operating Force 1.3N
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, 6A Switching Current, IP66 - GLEB01E7B

This limit switch provides precise mechanical position detection for industrial control and automation systems, delivering robust snap-action switching with double-pole changeover contacts for reliable circuit control in demanding environments.

Features and Benefits:

• Coil spring actuator delivers fast, repeatable actuation and reset
• IP66 enclosure protects against dust ingress and heavy water jets
• Die-cast zinc housing offers enhanced mechanical protection
• Switching capability supports 240V AC and 250V DC loads
• Mechanical endurance rated at 5 million cycles for long service life
• Low operating force of 1.3 N reduces actuator wear and energy use

Applications

• Suitable for conveyor position sensing in manufacturing lines
• Ideal for limit detection on industrial presses and shuttles
• Used with motor starters for end-of-travel detection
• Can be used for safety interlocks in assembly automation
• Used for gate or door position monitoring in outdoor installations

What contact arrangement does it provide for circuit design?

It uses a double-pole, double-throw snap-action contact set allowing two independent circuits to be switched simultaneously.

How does the device handle temperature extremes on site?

It operates across a temperature span from −25 °C to 85 °C, enabling use in both cool storage and warm process areas.

What conduit connection is available for wiring runs?

A PG13.5 threaded conduit entry is provided to simplify secure cable routing and conduit fittings.

Which approvals support integration into regulated systems?

The unit carries UL, CSA, CE and CCC approvals suitable for various international installation requirements.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.