Honeywell GLE Series Roller Lever Limit Switch, DPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

N° de stock RS:: 186-8447
Numéro d'article Distrelec:: 301-38-762
Référence fabricant:: GLEB01D
Fabricant:: Honeywell

Honeywell GLE Series Roller Lever Limit Switch, DPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

Sous-total (1 unité)*

233,83 €

(TVA exclue)

282,93 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 2 unité(s) expédiée(s) à partir du 17 août 2026
Plus 5 unité(s) expédiée(s) à partir du 18 janvier 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	233,83 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8447
Numéro d'article Distrelec:: 301-38-762
Référence fabricant:: GLEB01D
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	DPDT
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLE
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	85°C
	Length	60mm
	Width	65mm
	Depth	30mm
	Standards/Approvals	UL, CSA, CE, CCC
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Operating Force	10N
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration DPDT
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLE
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 85°C
	Length 60mm
	Width 65mm
	Depth 30mm
	Standards/Approvals UL, CSA, CE, CCC
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Operating Force 10N
	Mechanical Life 10000000Cycles

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, 6A Switching Current, IP67 - GLEB01D

This limit switch provides a rugged electromechanical end‑point detector for industrial control systems, using a roller‑lever actuator to convert mechanical motion into an electrical change. It is intended for installation where robust switching and environmental protection are required, offering snap‑action contacts for Rapid state change and compatibility with common control voltages.

Features and Benefits:

• Dual‑pole changeover contacts delivering flexible circuit control
• Snap‑action mechanism ensuring quick, repeatable switching
• Die‑cast zinc enclosure giving enhanced impact resistance
• Rated for 6A switching at 240V AC for standard control circuits
• Sealed to IP67 for protection against dust and temporary immersion
• Mechanical endurance of 10 million cycles for long service life

Applications

• Suitable for conveyor end‑of‑travel detection in factory automation
• Ideal for machine‑tool limit detection on sliding assemblies
• Used with actuator arms for position sensing in materials handling
• Can be used for safety interlocks where environmental sealing is needed

What conduit provision is available for wiring entry?

A PG13.5 threaded conduit entry is provided to accept compatible cable glands and conduit fittings.

What temperature range can it tolerate during operation?

It operates across a thermal span from −40°C up to 85°C for use in cold and moderately hot environments.

How does the actuator respond to applied force?

The roller‑lever requires an operating force of 10 N to initiate the snap‑action transition of the contacts.

What construction materials contribute to its durability?

The housing is formed from die‑cast zinc, which combines rigidity with resistance to mechanical wear.

Which electrical standards does it meet for industrial deployment?

It is certified to UL, CSA, CE and CCC standards relevant to electrical safety and performance.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.