Honeywell GLE Series Steel Roller Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

N° de stock RS:: 223-3167
Référence fabricant:: GLEB24A1B
Fabricant:: Honeywell

Honeywell GLE Series Steel Roller Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 6A

Sous-total (1 unité)*

237,34 €

(TVA exclue)

287,18 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	237,34 €

*Prix donné à titre indicatif

N° de stock RS:: 223-3167
Référence fabricant:: GLEB24A1B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Steel Roller
	IP Rating	IP67
	Contact Configuration	2 NO/2 NC
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLE
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	240V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	45mm
	Length	106.5mm
	Standards/Approvals	CCC, CE, CSA, UL
	Width	65mm
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mechanical Life	10000000Cycles
	Operating Force	0.17Nm

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Steel Roller
	IP Rating IP67
	Contact Configuration 2 NO/2 NC
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLE
	Minimum Operating Temperature -40°C
	Switching AC Voltage 240V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 45mm
	Length 106.5mm
	Standards/Approvals CCC, CE, CSA, UL
	Width 65mm
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mechanical Life 10000000Cycles
	Operating Force 0.17Nm

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, 240V Switching AC Voltage, IP67 - GLEB24A1B

This limit switch provides positive electrical feedback for position and safety control in industrial systems. It is designed for environments requiring robust actuation and discrete contact switching, combining a metal actuator with a sealed enclosure to perform reliably in harsh conditions.

Features and Benefits:

• Steel roller actuator enables accurate mechanical engagement
• 2NO2NC snap action switch delivers reliable contact changeover
• IP67 sealing permits immersion protection in wet environments
• Switching capacity 240V and 6A supports common control circuits
• Mechanical life 10 million cycles reduces maintenance frequency
• Operates from -40°C to 85°C for wide thermal range applications

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit sensing on industrial presses and machinery
• Used with control panels requiring discrete position feedback
• Can be used for gate and door position monitoring in outdoor installations

What type of enclosure material is used for durability?

The housing is die-cast zinc, providing impact resistance and structural strength for industrial settings.

How is electrical entry achieved for conduit routing?

Conduit connection is accommodated via a PG13.5 entry to simplify cable gland installation.

How does the switch perform electrically in DC systems?

It is rated for switching DC voltages up to 250V and can handle typical control currents up to 6A.

Which approvals support deployment in regulated installations?

The unit carries CE, UL, CSA and CCC approvals relevant to multiple regional standards.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.