Honeywell Technologies Roller Lever Limit Switch, SPDT, IP67, IP66, Plastic Housing, 600V ac, 10A

N° de stock RS:: 217-7137
Numéro d'article Distrelec:: 301-38-747
Référence fabricant:: GLDB01A1B
Fabricant:: Honeywell

Honeywell Technologies Roller Lever Limit Switch, SPDT, IP67, IP66, Plastic Housing, 600V ac, 10A

Sous-total (1 unité)*

107,92 €

(TVA exclue)

130,58 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

45 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	107,92 €

*Prix donné à titre indicatif

N° de stock RS:: 217-7137
Numéro d'article Distrelec:: 301-38-747
Référence fabricant:: GLDB01A1B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	SPDT
	IP Rating	IP67, IP66
	Housing Material	Plastic
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Minimum Operating Temperature	-40°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Standards/Approvals	UL, RoHS, CSA, CE, CCC
	Length	110mm
	Depth	31.1mm
	Width	30.5mm
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mounting Orientation	Multi Directional
	Operating Force	0.12Nm
	Mechanical Life	10000000Cycles

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration SPDT
	IP Rating IP67, IP66
	Housing Material Plastic
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Minimum Operating Temperature -40°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Standards/Approvals UL, RoHS, CSA, CE, CCC
	Length 110mm
	Depth 31.1mm
	Width 30.5mm
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mounting Orientation Multi Directional
	Operating Force 0.12Nm
	Mechanical Life 10000000Cycles

Honeywell Limit Switch, Roller Lever Actuator, IP67 - GLDB01A1B

This limit switch provides mechanical position sensing for industrial control systems, using a roller lever actuator to detect movement and trigger electrical changeover. It is built for use across automation, electrical and mechanical installations where a compact, sealed actuator is required and is compatible with multi-directional mounting arrangements.

Features and Benefits:

• SPDT snap action contact delivers concise switching behaviour
• 10A switching current supports moderate load circuits
• IP67/IP66 ingress protection enables use in wet environments
• Operates between -40°C and 85°C for wide temperature ranges
• Screw terminals allow secure, field-friendly wiring connections
• Mechanical life rated to 10 million cycles reduces replacement intervals

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit sensing on automated packaging machinery
• Used for position feedback on industrial valves and actuators
• Can be used for safety interlocks in control panels
• Used with motor starters to detect gearbox or shaft limits

What conduit provision exists for protected cable entry?

A PG13.5 threaded entry is provided to accept compatible conduit glands and cable sealing accessories.

How does the switch perform electrically at high voltage?

It is specified for switching AC up to 600V and rated for currents up to 10A on the contact, suitable for many control and auxiliary circuits.

What materials and mounting orientation flexibility are available?

The enclosure is formed from plastic and the unit supports multi-directional mounting to suit confined or angled installations.

Which approvals support installation in regulated systems?

The device carries UL, RoHS, CSA, CE and CCC approvals for conformity with several international standards.