Honeywell V7 Series Roller Lever Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 600V ac, 10A

N° de stock RS:: 217-7127
Référence fabricant:: BZV7-2RN2-PG
Fabricant:: Honeywell

Honeywell V7 Series Roller Lever Limit Switch, SPDT, IP65, Die Cast Zinc Housing, 600V ac, 10A

Sous-total (1 unité)*

339,52 €

(TVA exclue)

410,82 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

10 unité(s) expédiée(s) à partir du 07 décembre 2026
Plus 10 unité(s) expédiée(s) à partir du 14 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	339,52 €

*Prix donné à titre indicatif

N° de stock RS:: 217-7127
Référence fabricant:: BZV7-2RN2-PG
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP65
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Series	V7
	Minimum Operating Temperature	-30°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	70°C
	Standards/Approvals	RoHS
	Width	35mm
	Depth	44mm
	Length	79mm
	Hazardous Area Certification	No
	Operating Force	567g
	Mechanical Life	10000000Cycles
	Conduit Entry	20 mm
	Mounting Orientation	Side

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP65
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Series V7
	Minimum Operating Temperature -30°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 70°C
	Standards/Approvals RoHS
	Width 35mm
	Depth 44mm
	Length 79mm
	Hazardous Area Certification No
	Operating Force 567g
	Mechanical Life 10000000Cycles
	Conduit Entry 20 mm
	Mounting Orientation Side

Datasheet - BZV7-2RN2-PG

Honeywell Limit Switch, Roller Lever Actuator, 20mm Conduit Entry - BZV7-2RN2-PG

This limit switch provides position-detection for automation and safety interlocks in industrial systems, using a roller lever actuator to convert mechanical motion into an electrical change. It is intended for equipment where a compact, side-mounted sensing device is required and where robust environmental protection is necessary.

Features and Benefits:

• SPDT snap-action contact gives clear changeover at setpoints
• Screw terminals enable straightforward field-wiring connections
• Rated switching at 600V AC supports high-voltage circuits
• Mechanical life of 10 000 000 cycles reduces maintenance frequency
• IP65 enclosure resists dust ingress and water jets
• Die-cast aluminium housing provides Durable physical protection

Applications

• Suitable for end-of-travel detection on conveyor lines
• Ideal for limit sensing in packaging machinery
• Used for door position monitoring on industrial cabinets
• Can be used for actuator stroke verification in presses
• Used with control panels requiring side-mounted switching

What actuator orientation is intended for installation?

The unit is designed for side mounting so the roller lever is accessed laterally to the mounting plane.

Which Terminal format is provided for electrical connections?

Connections are MADE via screw-type terminals to accept secure conductor terminations.

What operational temperature range can be expected?

The device is rated to operate between -10 °C and 80 °C, suitable for many factory environments.

How does the contact configuration affect wiring options?

A single-pole double-throw arrangement permits use as either a normally closed or normally open contact in control circuits.

Are there any regulatory limitations on materials?

The construction conforms to RoHS requirements restricting certain hazardous substances in the components.