Honeywell Roller Lever Limit Switch, SPDT, IP66, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 10A
- N° de stock RS:
- 217-7140
- Numéro d'article Distrelec:
- 301-38-807
- Référence fabricant:
- LSYAC1E
- Fabricant:
- Honeywell
Sous-total (1 unité)*
429,54 €
(TVA exclue)
519,74 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 18 unité(s) expédiée(s) à partir du 09 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 429,54 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 217-7140
- Numéro d'article Distrelec:
- 301-38-807
- Référence fabricant:
- LSYAC1E
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Actuator Type | Roller Lever | |
| Product Type | Limit Switch | |
| Contact Configuration | SPDT | |
| IP Rating | IP66, IP67 | |
| Housing Material | Die Cast Zinc Epoxy Coated | |
| Contact Type | Snap Action | |
| Terminal Type | Screw | |
| Switching Current | 10A | |
| Minimum Operating Temperature | -10°C | |
| Switching AC Voltage | 600V ac | |
| Maximum Operating Temperature | 80°C | |
| Width | 36mm | |
| Length | 110mm | |
| Depth | 39mm | |
| Standards/Approvals | RoHS | |
| Hazardous Area Certification | No | |
| Mounting Orientation | Side | |
| Conduit Entry | 20 mm | |
| Mechanical Life | 50000000Cycles | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Actuator Type Roller Lever | ||
Product Type Limit Switch | ||
Contact Configuration SPDT | ||
IP Rating IP66, IP67 | ||
Housing Material Die Cast Zinc Epoxy Coated | ||
Contact Type Snap Action | ||
Terminal Type Screw | ||
Switching Current 10A | ||
Minimum Operating Temperature -10°C | ||
Switching AC Voltage 600V ac | ||
Maximum Operating Temperature 80°C | ||
Width 36mm | ||
Length 110mm | ||
Depth 39mm | ||
Standards/Approvals RoHS | ||
Hazardous Area Certification No | ||
Mounting Orientation Side | ||
Conduit Entry 20 mm | ||
Mechanical Life 50000000Cycles | ||
Honeywell Limit Switch, Roller Lever Actuator, 20mm Conduit Entry - LSYAC1E
This limit switch provides mechanical position sensing for industrial automation and electrical control systems, using a roller lever actuator to detect and interrupt motion in machinery and equipment. It is housed in a robust die-cast zinc enclosure designed for side mounting and features a single-pole, double-throw snap-action contact arrangement suited to control and signalling tasks.
Features and Benefits:
• Snap-action contacts deliver Rapid switching at load currents up to 10 A
• Rated for switching up to 600V AC to handle mains-level circuits
• IP66 and IP67 protection enables use in wet and dusty environments
• Mechanical endurance rated to 10 million cycles for long service life
• Screw terminals offer secure connections compatible with field wiring
• Operates across temperatures from -10 °C to 80 °C for varied conditions
• Rated for switching up to 600V AC to handle mains-level circuits
• IP66 and IP67 protection enables use in wet and dusty environments
• Mechanical endurance rated to 10 million cycles for long service life
• Screw terminals offer secure connections compatible with field wiring
• Operates across temperatures from -10 °C to 80 °C for varied conditions
Applications
• Suitable for conveyor end-of-travel detection in factories
• Ideal for door and guard interlocks in automated cells
• Used with motor starters for limit-based shutdown functions
• Can be used for position feedback on material-handling equipment
• Ideal for door and guard interlocks in automated cells
• Used with motor starters for limit-based shutdown functions
• Can be used for position feedback on material-handling equipment
What conduit provision does it offer for wiring entry?
It accepts a 20mm conduit entry to integrate with standard industrial trunking and conduit fittings.
How is the switch mounted and oriented?
It is intended for side mounting to allow the roller lever to be positioned for lateral actuation.
What materials are used for the enclosure to withstand workshop conditions?
The body is formed from die-cast zinc to provide a Durable metallic enclosure resistant to impact and mechanical wear.
Which contact configuration is provided and what does that enable?
It uses an SPDT arrangement so a single actuator movement can change between normally closed and normally open circuits.
Liens connexes
- Honeywell HDLS Series Roller Lever Limit Switch IP67 600V
- Honeywell Roller Lever Limit Switch IP67 600V ac, 10A
- Honeywell GLA Series Roller Lever Limit Switch IP67 600V ac, 6A
- Honeywell GLF Series Roller Lever Limit Switch IP67 600V ac, 6A
- Honeywell GLB Series Roller Lever Limit Switch IP67 600V ac, 10A
- Honeywell GLA Series Roller Lever Limit Switch IP67 600V ac, 6A
- Honeywell GLA Series Roller Lever Limit Switch IP67 600V ac, 10A
- Honeywell GLA Series Plunger Limit Switch IP67 600V ac, 6A