ABB 4-Pole DIN Rail Isolator Switch -, IP65, 16A
- N° de stock RS:
- 192-0863
- Référence fabricant:
- 1SCA022459R6510
- Fabricant:
- ABB
Sous-total (1 unité)*
53,33 €
(TVA exclue)
64,53 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 7 unité(s) expédiée(s) à partir du 07 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 53,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 192-0863
- Référence fabricant:
- 1SCA022459R6510
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Number of Poles | 4 | |
| Product Type | Isolator Switch | |
| Mount Type | DIN Rail | |
| IP Rating | IP65 | |
| Electrical Phase | 4 | |
| Handle Colour | Yellow, Red | |
| Terminal Type | Screw | |
| Series | OTP | |
| Switching Current | 16A | |
| Auxiliary Contacts Available | Yes | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 690V ac | |
| Padlock Compatibility | Yes | |
| Maximum Operating Temperature | 70°C | |
| Depth | 150mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | RoHS, CE | |
| Width | 60mm | |
| Length | 130mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Number of Poles 4 | ||
Product Type Isolator Switch | ||
Mount Type DIN Rail | ||
IP Rating IP65 | ||
Electrical Phase 4 | ||
Handle Colour Yellow, Red | ||
Terminal Type Screw | ||
Series OTP | ||
Switching Current 16A | ||
Auxiliary Contacts Available Yes | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 690V ac | ||
Padlock Compatibility Yes | ||
Maximum Operating Temperature 70°C | ||
Depth 150mm | ||
Hazardous Area Certification No | ||
Standards/Approvals RoHS, CE | ||
Width 60mm | ||
Length 130mm | ||
- Pays d'origine :
- FI
The enclosure in the OTP series is using a rigid glass reinforced polycarbonate enclosure. The enclosure is UV protected, protected against low-pressure water jets, and hence built for outdoor and indoor use. The cable entries are threaded and have knock out holes for 2 parallel cables and one control cable, both from top and bottom. The handle is pad lockable and made for three padlocks. The cover is interlocked. The interlocking can be by-passed, for thermographic etc. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal.
Liens connexes
- ABB 3-Pole DIN Rail Isolator Switch - 16A
- ABB 4-Pole DIN Rail Isolator Switch - 16A
- ABB 3-Pole DIN Rail Isolator Switch - 16A, 160 kW
- ABB 3+N-Pole DIN Rail Isolator Switch - IP54 7.5 kW
- ABB 2-Pole DIN Rail Isolator Switch - IP65 7.5 kW
- ABB 6-Pole DIN Rail Isolator Switch - 16A
- ABB 3-Pole DIN Rail Isolator Switch - 16A
- ABB 4-Pole DIN Rail Isolator Switch - 16A