ABB 3+N-Pole DIN Rail Isolator Switch -, IP65, IP54, 16A, 7.5 kW
- N° de stock RS:
- 192-0857
- Référence fabricant:
- 2CMA142441R1000
- Fabricant:
- ABB
Sous-total (1 unité)*
35,71 €
(TVA exclue)
43,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 35,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 192-0857
- Référence fabricant:
- 2CMA142441R1000
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Number of Poles | 3+N | |
| Product Type | Isolator Switch | |
| Mount Type | DIN Rail | |
| IP Rating | IP65, IP54 | |
| Electrical Phase | 3 | |
| Handle Colour | Red | |
| Series | BW325YTPN | |
| Terminal Type | Screw | |
| Switching Current | 16A | |
| Auxiliary Contacts Available | Yes | |
| Switching Power | 7.5kW | |
| Switching AC Voltage | 690V ac | |
| Minimum Operating Temperature | -25°C | |
| Padlock Compatibility | Yes | |
| Maximum Operating Temperature | 70°C | |
| Width | 60mm | |
| Length | 111mm | |
| Depth | 130mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | RoHS, CE | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Number of Poles 3+N | ||
Product Type Isolator Switch | ||
Mount Type DIN Rail | ||
IP Rating IP65, IP54 | ||
Electrical Phase 3 | ||
Handle Colour Red | ||
Series BW325YTPN | ||
Terminal Type Screw | ||
Switching Current 16A | ||
Auxiliary Contacts Available Yes | ||
Switching Power 7.5kW | ||
Switching AC Voltage 690V ac | ||
Minimum Operating Temperature -25°C | ||
Padlock Compatibility Yes | ||
Maximum Operating Temperature 70°C | ||
Width 60mm | ||
Length 111mm | ||
Depth 130mm | ||
Hazardous Area Certification No | ||
Standards/Approvals RoHS, CE | ||
- Pays d'origine :
- CZ
The enclosure of the ABB's side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets, and hence built for outdoor and indoor use. The enclosure is available in different colours, grey, yellow and white. The cable entries are threaded and have knock out holes for 2 parallel cables, both from top and bottom. Membrane grommets are included. The handle is pad lockable and made for one padlock. The cover is interlocked. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal. The terminals are easily accessible for easy installation.
Liens connexes
- ABB 2-Pole DIN Rail Isolator Switch - IP65 7.5 kW
- ABB 3-Pole Isolator Switch - 16A, 7.5 kW
- ABB 3-Pole DIN Rail Isolator Switch - 16A
- ABB 4-Pole DIN Rail Isolator Switch - 16A
- ABB 3-Pole Isolator Switch - IP54, 7.5 kW
- ABB 6-Pole Isolator Switch - IP65 7.5 kW
- ABB 3-Pole DIN Rail Isolator Switch - 16A, 160 kW
- ABB 4-Pole DIN Rail Non-Fused Isolator Switch - 16A, 7.5 kW