ABB 2-Pole DIN Rail Isolator Switch -, IP54, IP65, 16A, 7.5 kW
- N° de stock RS:
- 192-0856
- Référence fabricant:
- 2CMA142400R1000
- Fabricant:
- ABB
Sous-total (1 unité)*
31,68 €
(TVA exclue)
38,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 31,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 192-0856
- Référence fabricant:
- 2CMA142400R1000
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Product Type | Isolator Switch | |
| Number of Poles | 2 | |
| Mount Type | DIN Rail | |
| IP Rating | IP54, IP65 | |
| Electrical Phase | 2 | |
| Handle Colour | Grey | |
| Series | BW225DP | |
| Switching Current | 16A | |
| Terminal Type | Screw | |
| Auxiliary Contacts Available | Yes | |
| Switching Power | 7.5kW | |
| Switching AC Voltage | 690V ac | |
| Padlock Compatibility | Yes | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | CE, RoHS | |
| Length | 111mm | |
| Hazardous Area Certification | No | |
| Width | 60mm | |
| Depth | 130mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Product Type Isolator Switch | ||
Number of Poles 2 | ||
Mount Type DIN Rail | ||
IP Rating IP54, IP65 | ||
Electrical Phase 2 | ||
Handle Colour Grey | ||
Series BW225DP | ||
Switching Current 16A | ||
Terminal Type Screw | ||
Auxiliary Contacts Available Yes | ||
Switching Power 7.5kW | ||
Switching AC Voltage 690V ac | ||
Padlock Compatibility Yes | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals CE, RoHS | ||
Length 111mm | ||
Hazardous Area Certification No | ||
Width 60mm | ||
Depth 130mm | ||
- Pays d'origine :
- CZ
The enclosure of the ABB's side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets, and hence built for outdoor and indoor use. The enclosure is available in different colours, grey, yellow and white. The cable entries are threaded and have knock out holes for 2 parallel cables, both from top and bottom. Membrane grommets are included. The handle is pad lockable and made for one padlock. The cover is interlocked. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal. The terminals are easily accessible for easy installation.
Liens connexes
- ABB 3+N-Pole DIN Rail Isolator Switch - IP54 7.5 kW
- ABB 3-Pole Isolator Switch - 16A, 7.5 kW
- ABB 3-Pole DIN Rail Isolator Switch - 16A
- ABB 4-Pole DIN Rail Isolator Switch - 16A
- ABB 3-Pole Isolator Switch - IP54, 7.5 kW
- ABB 6-Pole Isolator Switch - IP65 7.5 kW
- ABB 3-Pole DIN Rail Isolator Switch - 16A, 160 kW
- ABB 4-Pole DIN Rail Non-Fused Isolator Switch - 16A, 7.5 kW