Nexperia 1 Flip Flop IC 74HC, 3 State, 20-Pin TSSOP
- N° de stock RS:
- 170-5409P
- Référence fabricant:
- 74HC574PW,118
- Fabricant:
- Nexperia
Offre groupée disponible
Consulter les options de prix de grosSous-total 100 unités (conditionné en bande continue)*
15,50 €
(TVA exclue)
18,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 150 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 100 - 200 | 0,155 € |
| 250 - 450 | 0,148 € |
| 500 - 1200 | 0,139 € |
| 1250 + | 0,124 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-5409P
- Référence fabricant:
- 74HC574PW,118
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Logic Family | 74HC | |
| Product Type | Flip Flop IC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | TSSOP | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Flip-Flop Type | D Flip-Flop | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 1 | |
| Standards/Approvals | No | |
| Height | 0.95mm | |
| Length | 6.6mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Logic Family 74HC | ||
Product Type Flip Flop IC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type TSSOP | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Flip-Flop Type D Flip-Flop | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 1 | ||
Standards/Approvals No | ||
Height 0.95mm | ||
Length 6.6mm | ||
Automotive Standard No | ||
The 74HC574: 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Liens connexes
- Nexperia 74HC574PW 3 State, 20-Pin TSSOP
- Nexperia 1 Flip Flop IC 74HC 20-Pin TSSOP
- Nexperia 74LVC574APW 3 State, 20-Pin TSSOP
- Nexperia 74HC574D 3 State, 20-Pin SO
- Nexperia 74LVC74APW D Type, 14-Pin TSSOP
- Nexperia 74LVC273PW D Type, 20-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 20-Pin TSSOP
- Nexperia 2 Flip Flop IC 74LVC 14-Pin TSSOP