Nexperia 74HC574PW,118 1 Flip Flop IC 74HC, 3 State, 20-Pin TSSOP
- N° de stock RS:
- 170-5409
- Référence fabricant:
- 74HC574PW,118
- Fabricant:
- Nexperia
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 50 unités)*
12,90 €
(TVA exclue)
15,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 150 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 50 - 50 | 0,258 € | 12,90 € |
| 100 - 200 | 0,155 € | 7,75 € |
| 250 - 450 | 0,148 € | 7,40 € |
| 500 - 1200 | 0,139 € | 6,95 € |
| 1250 + | 0,124 € | 6,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-5409
- Référence fabricant:
- 74HC574PW,118
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74HC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Minimum Supply Voltage | 2V | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Flip-Flop Type | D Flip-Flop | |
| Trigger Type | Positive Edge | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Number of Elements per Chip | 1 | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Length | 6.6mm | |
| Height | 0.95mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74HC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Minimum Supply Voltage 2V | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Flip-Flop Type D Flip-Flop | ||
Trigger Type Positive Edge | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Number of Elements per Chip 1 | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Length 6.6mm | ||
Height 0.95mm | ||
Automotive Standard No | ||
The 74HC574: 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems
Liens connexes
- Nexperia 74HC574PW 3 State, 20-Pin TSSOP
- Nexperia 1 Flip Flop IC 74HC 20-Pin TSSOP
- Nexperia 74LVC574APW 3 State, 20-Pin TSSOP
- Nexperia 74HC574D 3 State, 20-Pin SO
- Nexperia 74LVC74APW D Type, 14-Pin TSSOP
- Nexperia 74LVC273PW D Type, 20-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 20-Pin TSSOP
- Nexperia 2 Flip Flop IC 74LVC 14-Pin TSSOP