Nexperia 74LVC574APW,118 8 Flip Flop IC 74LVC, 3 State, 20-Pin TSSOP
- N° de stock RS:
- 170-8029
- Référence fabricant:
- 74LVC574APW,118
- Fabricant:
- Nexperia
Sous-total (1 bobine de 2500 unités)*
482,50 €
(TVA exclue)
585,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 22 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 0,193 € | 482,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-8029
- Référence fabricant:
- 74LVC574APW,118
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Product Type | Flip Flop IC | |
| Logic Family | 74LVC | |
| Input Type | Single Ended | |
| Output Type | 3 State | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Minimum Supply Voltage | 1.2V | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 20 | |
| Minimum Operating Temperature | -40°C | |
| Trigger Type | Positive Edge | |
| Number of Elements per Chip | 8 | |
| Maximum Operating Temperature | 125°C | |
| Length | 6.6mm | |
| Height | 0.95mm | |
| Width | 4.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Product Type Flip Flop IC | ||
Logic Family 74LVC | ||
Input Type Single Ended | ||
Output Type 3 State | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Minimum Supply Voltage 1.2V | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 20 | ||
Minimum Operating Temperature -40°C | ||
Trigger Type Positive Edge | ||
Number of Elements per Chip 8 | ||
Maximum Operating Temperature 125°C | ||
Length 6.6mm | ||
Height 0.95mm | ||
Width 4.5mm | ||
The 74LVC574A is an octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. A clock (CP) and an Output Enable (OE) input are common to all flip-flops. The eight flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW to HIGH CP transition. When OE is LOW, the contents of the eight flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Liens connexes
- Nexperia 74LVC74APW D Type, 14-Pin TSSOP
- Nexperia 74LVC273PW D Type, 20-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 20-Pin TSSOP
- Nexperia 2 Flip Flop IC 74LVC 14-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 5-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 5-Pin TSSOP
- Nexperia 1 Flip Flop IC 74LVC 8-Pin TSSOP
- Nexperia 74LVC1G79GW CMOS, 5-Pin TSSOP