Nexperia 74HC574D,653 8 Flip Flop IC 74HC, 3 State, 20-Pin SO
- N° de stock RS:
- 170-7983
- Référence fabricant:
- 74HC574D,653
- Fabricant:
- Nexperia
Sous-total (1 bobine de 2000 unités)*
492,00 €
(TVA exclue)
596,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 01 février 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2000 + | 0,246 € | 492,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-7983
- Référence fabricant:
- 74HC574D,653
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Logic Family | 74HC | |
| Product Type | Flip Flop IC | |
| Input Type | CMOS | |
| Output Type | 3 State | |
| Clock Frequency | 24MHz | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SO | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 38ns | |
| Trigger Type | Positive Edge | |
| Flip-Flop Type | D Flip-Flop | |
| Maximum Operating Temperature | 125°C | |
| Number of Elements per Chip | 8 | |
| Length | 13mm | |
| Height | 2.45mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Logic Family 74HC | ||
Product Type Flip Flop IC | ||
Input Type CMOS | ||
Output Type 3 State | ||
Clock Frequency 24MHz | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SO | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 38ns | ||
Trigger Type Positive Edge | ||
Flip-Flop Type D Flip-Flop | ||
Maximum Operating Temperature 125°C | ||
Number of Elements per Chip 8 | ||
Length 13mm | ||
Height 2.45mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
The 74HC574, 74HCT574 is an 8-bit positive-edge triggered D-type flip-flop with 3-state outputs. The device features a clock (CP) and output enable (OE) inputs. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Mixed 5 V and 3.3 V applications
Improved signal integrity with integrated termination resistors
High noise immunity
Flow through pin out for easy layout
Wide supply voltage range
Low propagation delay
Overvoltage tolerant input options
Integrated source termination resistor options
Bus hold options
Key applications
Frequency division
Controlled delays
Interface between asynchronous and synchronous systems