RS PRO Clearance Gauge, 0.03 mm min, 0.18 mm max
- N° de stock RS:
- 222-4444
- Fabricant:
- RS PRO
Sous-total (1 boîte de 10 unités)*
7,95 €
(TVA exclue)
9,62 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 37 unité(s) expédiée(s) à partir du 21 septembre 2026
- Plus 653 unité(s) expédiée(s) à partir du 21 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Boîte(s) | La Boite | Prix par unité* |
|---|---|---|
| 1 + | 7,95 € | 0,795 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 222-4444
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Clearance Gauge | |
| Maximum Measurement | 0.18 mm | |
| Minimum Measurement | 0.03 mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Clearance Gauge | ||
Maximum Measurement 0.18 mm | ||
Minimum Measurement 0.03 mm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
RS PRO Clearance Gauge, 0.025 mm → 0.175 mm
This clearance gauge provides an easy but accurate way to measure the clearance space between hidden surfaces. It's particularly useful for measuring the clearance in split bearings or in situations where feeler gauges can't be inserted.
Also known as plastigauge, this strip of soft material can be sandwiched between the bearing surface on a shaft and the bearing shell. When you tighten the bearing cap, the plastigauge is flattened and you can then figure out the clearance by comparing the flattened plastigauge to the supplied calibration card.
This clearance gauge is used to measure distances ranging from 0.025 mm to 0.175 mm. These gauges from the RS PRO range have been thoroughly tested for reliability. They're ideal for applications such as measuring the clearance in pipe-flanges, head gaskets, injection moulding tools and cylinder heads.
Features and Benefits
• Clearance gauge
• Minimum measurement of 0.025 mm
• Maximum measurement of 0.175 mm
• Calibration card supplied
• Non-corrosive
• Oil-soluble
• To be certain of accuracy, you should take particular care when measuring clearances below 0.06 mm
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Liens connexes
- RS PRO Clearance Gauge 0.5 mm max
- RS PRO Clearance Gauge 0.25 mm max
- Clearance Gauges
- RS PRO Neodymium Magnet 0.18 kg, Width 3 mm
- Sanyo Denki San Ace 40 9P Series Fan 0.18 m³/min 0.28 A Max 15 mm 40mm 40 mm
- RS PRO OD8025 Series Axial Fan 40 cfm 0.18 A Max, IP68 80 mm 80mm 25 mm
- PUI Audio 0.18 mm Piezo Buzzer Component 100 mm 30V Max
- RS PRO Digital Height Gauge, max. measurement 300 mm