Engineering Test & Measurement

When measuring angles, levels or gaps, it's important that your measurements are accurate. Our range of products includes optical, laser and manual measuring devices from leading suppliers including Bosch, DeWalt, Leica, Laserliner, Sola, Stanley, Starrett and RS PRO.

Calipers

Calipers are used to offer a high degree of accuracy when measuring the gap between an object or when measuring length or distances. Calipers can be found in laboratories, workshops and engineering applications. There are many variations of a caliper however they all offer the same levels of measuring.

Durameters

These hand-held measuring devices allow you to measure the hardness of a product. They can measure flexible elastomers, hard rubbers, and rigid plastics just to name a few.

Measuring Levels

There are several products available that enable you to measure how level something is.

Laser levels give a high level of accuracy, with the beam also being visible over a long distance. There are three different types of these measuring levels: line, dot and rotary. Which one you choose will depend on the job. For example, a rotary laser level will give a 360° laser line and is effective for use in outdoor spaces such as when laying the foundations of a house, to ensure the surface is flat.

Spirit levels are a low-cost, conventional alternative to a laser level, while still giving you high accuracy levels; they can be manual or digital. An inclinometer is a type of spirit level which is used for measuring slope angles.

Angular measurement

The easiest way to measure an angle is with a protractor. There are two main types of protractor: semi-circular which will measure up to 180°, and bevel which will measure 360°.

There are many other measuring devices available which are particularly useful for engineers who are looking for precision measurements including combination squares and centre and edge finders.

Calibrating your Equipment

It's important that your angle and level measurement equipment is giving you accurate readings at all times, and therefore calibration should be carried out regularly. At RS, we offer an expert calibration service which covers equipment such as gauges, spirit levels and set squares. What's more, our Calibration Laboratory is UKAS-accredited, so you can be confident in your readings.

Angle Gauges
Angle Gauges
Bore Gauges
Bore Gauges
Calipers
Calipers
Clearance Gauges
Clearance Gauges
DTI Gauges
DTI Gauges
Depth Gauges
Depth Gauges
Dial Indicators
Dial Indicators
Durometers
Durometers
Gauge Block Sets
Gauge Block Sets
Hardness Testers
Hardness Testers
Height Gauges
Height Gauges
Measuring Sets
Measuring Sets
Micrometers
Micrometers
Parallel Sets
Parallel Sets
Plug Gauges & Ring Gauges
Plug Gauges & Ring Gauges
Radius Gauges
Radius Gauges
Surface Gauges
Surface Gauges
Surface Roughness Comparators
Surface Roughness Comparators
Surface Roughness Testers
Surface Roughness Testers
Thickness Gauges
Thickness Gauges
Thread Gauges
Thread Gauges
Torque Testers
Torque Testers

1210 Produits présentés pour Engineering Test & Measurement

Trier par
1 sur 61
En stock
HAZET Torque Tester, 3/8 in Drive, 3 % Accuracy, 0.5 Nm Increment
  • N° de stock RS 647-005
  • Référence fabricant 5110-3CT
Sous-total (1 unité)
180,20 €(TVA exclue)
180,20 €/unité
En stock
Facom Digital Torque Tester, 1/2 in Drive, ±3 % Accuracy
  • N° de stock RS 235-0910
  • Référence fabricant E.506-135S
Sous-total (1 unité)
397,13 €(TVA exclue)
397,13 €/unité
En stock
Facom Digital Torque Tester, 1/2 in Drive, ±3 % Accuracy
  • N° de stock RS 235-0911
  • Référence fabricant E.506-200S
Sous-total (1 unité)
442,50 €(TVA exclue)
442,50 €/unité
Stocké-e par le fabricant
Facom Torque Calibration Bench Torque Wrench
  • N° de stock RS 235-3890
  • Référence fabricant CD.12A
Sous-total (1 unité)
22 649,54 €(TVA exclue)
22 649,54 €/unité
Temporairement en rupture de stock
STAHLWILLE Torque Tester, 45748 in Drive, 20 Nm Increment
  • N° de stock RS 268-4363
  • Référence fabricant 96521080
Sous-total (1 unité)
4 711,38 €(TVA exclue)
4 711,38 €/unité
Temporairement en rupture de stock
STAHLWILLE Torque Tester, 45750 in Drive, 400 Nm Increment
  • N° de stock RS 268-4365
  • Référence fabricant 96521084
Sous-total (1 unité)
4 807,75 €(TVA exclue)
4 807,75 €/unité
Temporairement en rupture de stock
STAHLWILLE Torque Tester, 45748 in Drive, 10 Nm Increment
  • N° de stock RS 268-4366
  • Référence fabricant 96521085
Sous-total (1 unité)
4 576,21 €(TVA exclue)
4 576,21 €/unité
Stocké-e par le fabricant
Gedore Torque Angle Gauge, 3/4 in Drive
  • N° de stock RS 608-432
  • Référence fabricant 7716510
Sous-total (1 unité)
364,95 €(TVA exclue)
364,95 €/unité
En stock
HAZET Torque Tester, 1/2 in Drive, 3 % Accuracy, 2 Nm Increment
  • N° de stock RS 646-998
  • Référence fabricant 5123-3CT
Sous-total (1 unité)
223,13 €(TVA exclue)
223,13 €/unité
En stock
HAZET Torque Tester, 1/2 in Drive, 3 % Accuracy, 1 Nm Increment
  • N° de stock RS 646-999
  • Référence fabricant 5122-3CT
Sous-total (1 unité)
202,68 €(TVA exclue)
202,68 €/unité
En stock
Norbar Torque Tools Digital Torque Tester, 0.5 in Drive, ±1 % Accuracy, 0.136 Nm Increment
  • N° de stock RS 221-7467
  • Référence fabricant 43522
Sous-total (1 unité)
1 439,77 €(TVA exclue)
1 439,77 €/unité
En stock
Norbar Torque Tools Digital Torque Tester, 27 mm Drive, ±1 % Accuracy, 0.136 Nm Increment
  • N° de stock RS 221-7472
  • Référence fabricant 43529
Sous-total (1 unité)
2 365,57 €(TVA exclue)
2 365,57 €/unité
En stock
Norbar Torque Tools Digital Torque Tester, 0.5 in Drive, ±1 % Accuracy, 0.136 Nm Increment
  • N° de stock RS 221-7468
  • Référence fabricant 43523
Sous-total (1 unité)
1 599,80 €(TVA exclue)
1 599,80 €/unité
En stock
SAM Caliper 100 mm Straight Spring
  • N° de stock RS 221-3347
  • Référence fabricant 782-A-20
Sous-total (1 unité)
22,95 €(TVA exclue)
22,95 €/unité
Temporairement en rupture de stock
STAHLWILLE Torque Tester, 3/8 in Drive, ±1 % Accuracy, 100 Nm Increment
  • N° de stock RS 268-4358
  • Référence fabricant 96521022
Sous-total (1 unité)
2 398,34 €(TVA exclue)
2 398,34 €/unité
Stocké-e par le fabricant
Gedore Torque Angle Gauge, 1/2 in Drive
  • N° de stock RS 602-631
  • Référence fabricant 7718480
Sous-total (1 unité)
156,02 €(TVA exclue)
156,02 €/unité
En stock
Vogel Callipers 150 mm 0.02 mm Resolution Dial, Metric, UKAS
  • N° de stock RS 859-024
  • Référence fabricant 201102
Sous-total (1 unité)
104,27 €(TVA exclue)
104,27 €/unité
Stocké-e par le fabricant
MikronTec Plug Plug Gauge, 28 mm Pitch Diameter
  • N° de stock RS 101-697
  • Référence fabricant 8AA0280011
Sous-total (1 unité)
44,70 €(TVA exclue)
44,70 €/unité
En stock
HAZET Torque Tester, 1/4 in Drive, 3 % Accuracy, 0.25 Nm Increment
  • N° de stock RS 647-001
  • Référence fabricant 5108-3CT
Sous-total (1 unité)
199,32 €(TVA exclue)
199,32 €/unité
En stock
Vogel Callipers 300 mm 0.01 mm Resolution Digital, Metric
  • N° de stock RS 649-917
  • Référence fabricant 202042-3
Sous-total (1 unité)
170,48 €(TVA exclue)
170,48 €/unité
1
2
3
61
Résultats par page

Liens connexes