RS PRO Clearance Gauge, 0.18 mm min, 0.5 mm max
- N° de stock RS:
- 222-4472
- Fabricant:
- RS PRO
Sous-total (1 boîte de 10 unités)*
11,74 €
(TVA exclue)
14,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 30 unité(s) expédiée(s) à partir du 14 septembre 2026
- Plus 129 unité(s) expédiée(s) à partir du 14 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Boîte(s) | La Boite | Prix par unité* |
|---|---|---|
| 1 + | 11,74 € | 1,174 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 222-4472
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Clearance Gauge | |
| Maximum Measurement | 0.5 mm | |
| Minimum Measurement | 0.18 mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Clearance Gauge | ||
Maximum Measurement 0.5 mm | ||
Minimum Measurement 0.18 mm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
RS PRO Clearance Gauge, 0.175 mm min, 0.5 mm max
Need to measure the clearance between fitted surfaces such as mains bearings, pipe flanges or housings? This plastic gauge from RS PRO is simple and effective to use. It's particularly useful in situations where a feeler gauge cannot be inserted.
The surfaces you want to measure between need to be separated and the gauge inserted. When the surfaces are returned to their usual position, they'll compress the plastic gauge, spreading it out over the surface. Once the gauge is removed, you can get your reading by measuring its width against the supplied calibration card. It can be used to measure clearances of between 0.175 mm and 0.5 mm.
The gauge is non-corrosive and soluble in oil, so any bits that get left behind won't harm your equipment. Gauges of this kind can be used to check for lobing and ovality in shafts. They're also commonly used to calibrate injection-moulding tools.
Features and Benefits
• Maximum measurement of 0.5 mm
• Minimum measurement of 0.175 mm
Liens connexes
- RS PRO Clearance Gauge 0.18 mm max
- RS PRO Clearance Gauge 0.25 mm max
- Clearance Gauges
- RS PRO Neodymium Magnet 0.18 kg, Width 3 mm
- Sanyo Denki San Ace 40 9P Series Fan 0.18 m³/min 0.28 A Max 15 mm 40mm 40 mm
- RS PRO OD8025 Series Axial Fan 40 cfm 0.18 A Max, IP68 80 mm 80mm 25 mm
- RS PRO Radius Gauge Set Metric 16 Blades 0.5 mm 0.75 mm
- PUI Audio 0.18 mm Piezo Buzzer Component 100 mm 30V Max