Chauvin Arnoux CA 762, LED Voltage Tester, 750 V dc, 690V ac Continuity Check, Battery Powered CAT IV, P01191762Z

Voir l’ensemble des Voltage Testers

Sous-total (1 unité)*

98,98 €

(TVA exclue)

119,77 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 36 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 22 unité(s) expédiée(s) à partir du 07 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +98,98 €

*Prix donné à titre indicatif

Options d'étalonnage

presentation
Chauvin Arnoux CA 762, LED Voltage Tester, 750 V dc, 690V ac Continuity Check, Battery Powered CAT IV RSCAL, P01191762Z
Type d'étalonnage:
RSCAL
N° de stock RS
913-6868

la pièce

171,98 €

(TVA exclue)

208,10 €

(TVA incluse)

N° de stock RS:
914-0034
Numéro d'article Distrelec:
300-77-264
Référence fabricant:
P01191762Z
Fabricant:
Chauvin Arnoux
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Chauvin Arnoux

Product Type

Voltage Tester

Continuity Check

Yes

Display Type

LED

IP Rating

IP65

Battery Type

AAA LR03

Power Source

Battery

Weight

210g

Minimum Operating Temperature

-15°C

Maximum Operating Temperature

45°C

Maximum Voltage

750, 690V dc

Height

40mm

Hazardous Area Certification

NO

Standards/Approvals

IEC 613261, IEC 612433

Length

163mm

Width

64mm

Safety Category Voltage

600V

Model Number

CA 762

Safety Category Level

CAT IV

Statut RoHS : Exempté

Pays d'origine :
CN

Chauvin Arnoux Low-voltage Two-pole Voltage Absence Tester CA762


Chauvin Arnoux CA762 is a voltage detector with indicator lights. It is an instrument of choice for electricians checking that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 2 and can be used to work on any indoor or outdoor 600 V CAT IV installation. To fulfil the requirements of the standards and legislation in different countries, RS offers different versions - without IP2X accessories ( 914-0034 ) and with IP2X accessories ( 914-0037 ). The CA762 is equipped with a redundant safety system in the event of power supply faults. An 'ELV LED' flashes whenever the voltage exceeds 50 V AC / 120 V DC. The full Autotest of the CA762 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

Full integrated autotest

Voltage testing up to 690 V AC (16 2/3 Hz - 800 Hz) / 750 V DC

Single-pole phase test

Phase sequence testing up to 400 Hz

Input impedance >400 kΩ

Continuity testing

Extended continuity test 2 kΩ, 60 kΩ, 300 kΩ

Phase rotation, 2-wire method

Removable test probe and cable

Dimensions 163 x 64 x 40 mm

IP65 protection rating

Weight 210 g

Voltage Level Indicators


A range of voltage testers each available in versions suitable for electronic or electrical applications.

Note

The voltages indicated on the CA762 are nominal voltages - users must ensure the device will be used on networks at standardised voltages.

Supplied with

Red test probe 2 mm diameter, black lead terminated by test probe 2mm diameter (CA742) or 90 cm black lead and 25 cm red lead terminated
by an IP2X probe tip 4 mm diameter (CA742 IP2X) plus (both models) strap, battery (x2), user manual (in 5 languages), verification certificate

Liens connexes