Gossen Metrawatt METRAVOLT 12D+L, LCD Voltage Tester, 1500V ac Continuity Check, Battery Powered CAT IV, M630G
- N° de stock RS:
- 760-4551
- Référence fabricant:
- M630G
- Fabricant:
- Gossen Metrawatt
Sous-total (1 unité)*
429,25 €
(TVA exclue)
519,39 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 429,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 760-4551
- Référence fabricant:
- M630G
- Fabricant:
- Gossen Metrawatt
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gossen Metrawatt | |
| Product Type | Voltage Tester | |
| Continuity Check | Yes | |
| Display Type | LCD | |
| IP Rating | IP65 | |
| Power Source | Battery | |
| Weight | 270g | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 55°C | |
| Maximum Voltage | 1500V ac | |
| Width | 39 mm | |
| Height | 240mm | |
| Standards/Approvals | VDE 04701, EN 60529, VDE 0843201, DIN EN 612433, DIN EN 613261, VDE 0682401:201102 | |
| Length | 62mm | |
| Hazardous Area Certification | No | |
| Model Number | METRAVOLT 12D+L | |
| Safety Category Voltage | 1000V | |
| Safety Category Level | CAT IV | |
| Sélectionner tout | ||
|---|---|---|
Marque Gossen Metrawatt | ||
Product Type Voltage Tester | ||
Continuity Check Yes | ||
Display Type LCD | ||
IP Rating IP65 | ||
Power Source Battery | ||
Weight 270g | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 55°C | ||
Maximum Voltage 1500V ac | ||
Width 39 mm | ||
Height 240mm | ||
Standards/Approvals VDE 04701, EN 60529, VDE 0843201, DIN EN 612433, DIN EN 613261, VDE 0682401:201102 | ||
Length 62mm | ||
Hazardous Area Certification No | ||
Model Number METRAVOLT 12D+L | ||
Safety Category Voltage 1000V | ||
Safety Category Level CAT IV | ||
- Pays d'origine :
- DE
Metravolt 12D+L Voltage and Continuity Tester
The Metravolt 12D+L is a 2-pole voltage tester with digital display combined with integrated continuity, phase, polarity and phase sequence testing.
The voltage tester allows for safe detection and measurement of AC and DC voltages within a range of 24 to 1000 V at frequencies of up to 4 kHz
Resistance can also be measured within a range of 0 to 1999 kΩ with the integrated continuity tester
Voltage and resistance values appear in digital format at the LCD
Three LEDs indicate dangerous contact voltage and phase sequence, another LED indicates resistance and a sound generator indicates continuity
Fully Automated Measuring Sequence
Measured Value Storage
Self-Test and Battery Monitoring
Rugged Housing
Complies with CAT IV
Voltage Level Indicators
A range of voltage testers each available in versions suitable for electronic or electrical applications.
Supplied with
Operating instructions, battery
Liens connexes
- Gossen Metrawatt M611H 1000V ac Battery Powered
- Gossen Metrawatt M611G 1000V ac Battery Powered
- Gossen Metrawatt PROFISAFE 690L 690V ac/dc Battery Powered, CAT III 690V
- Gossen Metrawatt DUSPOL expert 1000 1000V ac/dc Battery Powered, CAT III 1000V
- Gossen Metrawatt DUSPOL digital 1000 1000 V ac Continuity Check CAT
- Sefram SEFRAM66 1500V dc CAT III 1000V
- Gossen Metrawatt Z502N Trolley, For Use With E-CHECK Case
- Gossen Metrawatt SECUTEST LEMONGREEN PAT Testing Kit Insulation MOSFET Current,