Gossen Metrawatt M611G, LED Voltage Tester, 1000V ac Continuity Check, Battery Powered dsPIC33CK CPU, M611G
- N° de stock RS:
- 645-139
- Référence fabricant:
- M611G
- Fabricant:
- Gossen Metrawatt
Sous-total (1 unité)*
73,73 €
(TVA exclue)
89,21 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 25 unité(s) expédiée(s) à partir du 05 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 73,73 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 645-139
- Référence fabricant:
- M611G
- Fabricant:
- Gossen Metrawatt
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Gossen Metrawatt | |
| Product Type | Voltage Tester | |
| Continuity Check | Yes | |
| Display Type | LED | |
| RCD Trip Test | Yes | |
| IP Rating | IP64 | |
| Battery Type | IEC AAA | |
| Power Source | Battery | |
| Weight | 275g | |
| Minimum Operating Temperature | -15°C | |
| Maximum Voltage | 1000V ac | |
| Maximum Operating Temperature | 50°C | |
| Hazardous Area Certification | No | |
| Height | 35mm | |
| Length | 280mm | |
| Width | 75mm | |
| Standards/Approvals | 2014/35/EU, 2014/30/EU, DIN EN IEC 61326-1, DIN EN IEC 61243-3 | |
| Safety Category Voltage | 1000V ac | |
| Model Number | M611G | |
| Safety Category Level | dsPIC33CK CPU | |
| Sélectionner tout | ||
|---|---|---|
Marque Gossen Metrawatt | ||
Product Type Voltage Tester | ||
Continuity Check Yes | ||
Display Type LED | ||
RCD Trip Test Yes | ||
IP Rating IP64 | ||
Battery Type IEC AAA | ||
Power Source Battery | ||
Weight 275g | ||
Minimum Operating Temperature -15°C | ||
Maximum Voltage 1000V ac | ||
Maximum Operating Temperature 50°C | ||
Hazardous Area Certification No | ||
Height 35mm | ||
Length 280mm | ||
Width 75mm | ||
Standards/Approvals 2014/35/EU, 2014/30/EU, DIN EN IEC 61326-1, DIN EN IEC 61243-3 | ||
Safety Category Voltage 1000V ac | ||
Model Number M611G | ||
Safety Category Level dsPIC33CK CPU | ||
- Pays d'origine :
- CN
Gossen-Metrawatt Voltage Tester, 1000V ac Safety Category Voltage, IP64 - M611G
This voltage tester is a battery-powered diagnostic tool designed for electrical measurement and verification in demanding field conditions. It provides Visual indication via an LED display and supports essential tests such as RCD trip and continuity checks while operating across a wide ambient temperature range. The instrument is intended for use where daily portable electrical testing and safety verification are required.
Features and Benefits:
• 1000Vac safety rating enables high-voltage verification
• LED display provides clear status indication
• Battery operation allows untethered field use
• IP64 ingress protection resists dust and water spray
• RCD trip and continuity checks support functional testing
• LED display provides clear status indication
• Battery operation allows untethered field use
• IP64 ingress protection resists dust and water spray
• RCD trip and continuity checks support functional testing
Applications
• Suitable for on-site electrical safety inspections
• Ideal for maintenance of distribution boards and circuits
• Used with portable test procedures in industrial environments
• Can be used for verification during commissioning and fault-finding
• Suitable for use across varied ambient temperature ranges
• Ideal for maintenance of distribution boards and circuits
• Used with portable test procedures in industrial environments
• Can be used for verification during commissioning and fault-finding
• Suitable for use across varied ambient temperature ranges
What power source does it use?
It runs on IEC AAA batteries which permit portable operation.
Which safety categories does it support?
It meets CAT II, CAT III and CAT IV levels for varied installation environments.
What environmental conditions can it operate within?
It functions between -15°C and 50°C and has IP64 protection against dust and water spray.
What measurements and tests are available?
It performs voltage checks up to 1000Vac, continuity verification and RCD trip testing.
How Compact and transportable is the instrument?
The unit weighs 275 g and is shaped for handheld portability with a length of 280 mm, width of 75 mm and height of 35 mm.
Liens connexes
- Gossen Metrawatt M611G 1000V ac Continuity Check RSCAL, M611G
- Gossen Metrawatt M611H 1000V ac Continuity Check M611H
- Gossen Metrawatt M611L 1000V ac Continuity Check M611L
- Gossen Metrawatt M611L 1000V ac Continuity Check RSCAL, M611L
- Gossen Metrawatt PROFISAFE 690L 690V Continuity Check CAT IV, M630J
- Gossen Metrawatt METRAVOLT 12D+L 1000 V ac Battery Powered CAT IV,
- Gossen Metrawatt DUSPOL expert 1000 1000V ac/dc Continuity Check CAT IV,
- Gossen Metrawatt DUSPOL digital 1000 1000 V ac Battery Powered CAT IV,
