Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, RSCAL, FLUKE T90

N° de stock RS:: 749-2762
Numéro d'article Distrelec:: 110-30-312
Référence fabricant:: FLUKE T90
Fabricant:: Fluke

Fluke T90, Digital Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT II, CAT III, RSCAL, FLUKE T90

Sous-total (1 unité)*

146,00 €

(TVA exclue)

176,66 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stock limité

52 restante(s), prêt à être expédié
Plus 39 unité(s) expédiée(s) à partir du 14 mai 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	146,00 €

*Prix donné à titre indicatif

N° de stock RS:: 749-2762
Numéro d'article Distrelec:: 110-30-312
Référence fabricant:: FLUKE T90
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Product Type	Voltage Tester
	Continuity Check	Yes
	Display Type	Digital
	RCD Trip Test	Yes
	IP Rating	IP54
	Battery Type	AAA
	Power Source	Battery
	Weight	280g
	Minimum Operating Temperature	-15°C
	Maximum Operating Temperature	45°C
	Maximum Voltage	690V ac/dc
	Standards/Approvals	No
	Hazardous Area Certification	NO
	Length	230mm
	Width	65mm
	Height	38mm
	Safety Category Level	CAT II, CAT III
	Safety Category Voltage	690V
	Model Number	T90
	Calibrated	RSCAL

	Sélectionner tout
	Marque Fluke
	Product Type Voltage Tester
	Continuity Check Yes
	Display Type Digital
	RCD Trip Test Yes
	IP Rating IP54
	Battery Type AAA
	Power Source Battery
	Weight 280g
	Minimum Operating Temperature -15°C
	Maximum Operating Temperature 45°C
	Maximum Voltage 690V ac/dc
	Standards/Approvals No
	Hazardous Area Certification NO
	Length 230mm
	Width 65mm
	Height 38mm
	Safety Category Level CAT II, CAT III
	Safety Category Voltage 690V
	Model Number T90
	Calibrated RSCAL

Statut RoHS non applicable

Fluke Voltage Tester, 690V Maximum Voltage, IP54 - FLUKE T90

This handheld voltage tester is a two-pole instrument designed to verify presence or absence of voltage and to check continuity in industrial and commercial electrical systems. It operates across low to high mains levels and is powered by AAA batteries, delivering straightforward indications via backlit LEDs and audible signals to support routine troubleshooting in automation, electronics and mechanical environments.

Features & Benefits

• Measures up to 690V AC/DC for high-voltage verification
• Continuity check with audible indication for quick circuit confirmation
• RCD trip test function for on-site residual-current device verification
• IP54-rated protection for use in dusty and splash-prone locations
• Dual-insulated lead tested to extended bend cycles for durability
• Low-battery indicator to prevent inaccurate readings during use

Applications

• Suitable for verifying live conductors on distribution boards
• Ideal for checking continuity in control panels and wiring looms
• Used for on-site RCD testing during safety maintenance
• Can be used for phase detection with single-pole testing
• Used with field service and commissioning tasks in factories

What power source does it require and how does that affect field use?

It runs on AAA batteries which permit Compact handheld operation and straightforward battery replacement on site.

How does the tester perform under elevated ambient temperatures?

It is rated to operate up to 45°C, allowing use in warmer plant rooms and engine bays without derating.

Which safety categories cover common electrical distribution work?

It meets CAT II and CAT III classifications applicable to equipment testing on domestic and industrial installations up to specified voltages.

How heavy and portable is the unit for daily site carry?

The instrument weighs 180 g, enabling easy pocket or pouch carry for technicians.