Fluke T130, LCD Voltage Tester, 690V ac/dc Continuity Check, Battery Powered CAT IV, CAT III, FLUKE T130
- N° de stock RS:
- 750-8435
- Numéro d'article Distrelec:
- 110-30-314
- Référence fabricant:
- FLUKE T130
- Fabricant:
- Fluke
Sous-total (1 unité)*
192,00 €
(TVA exclue)
232,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 12 restante(s), prêt à être expédié
- Plus 20 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 192,00 € |
*Prix donné à titre indicatif
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
170,69 €
(TVA exclue)
206,53 €
(TVA incluse)
- N° de stock RS:
- 750-8435
- Numéro d'article Distrelec:
- 110-30-314
- Référence fabricant:
- FLUKE T130
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Voltage Tester | |
| Continuity Check | Yes | |
| Display Type | LCD | |
| RCD Trip Test | Yes | |
| IP Rating | IP64 | |
| Battery Type | AAA | |
| Power Source | Battery | |
| Weight | 280g | |
| Maximum Voltage | 690V ac/dc | |
| Height | 38mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | No | |
| Diameter | 4mm | |
| Width | 70mm | |
| Length | 260mm | |
| Safety Category Voltage | 600V, 690V | |
| Safety Category Level | CAT IV, CAT III | |
| Model Number | T130 | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Voltage Tester | ||
Continuity Check Yes | ||
Display Type LCD | ||
RCD Trip Test Yes | ||
IP Rating IP64 | ||
Battery Type AAA | ||
Power Source Battery | ||
Weight 280g | ||
Maximum Voltage 690V ac/dc | ||
Height 38mm | ||
Hazardous Area Certification No | ||
Standards/Approvals No | ||
Diameter 4mm | ||
Width 70mm | ||
Length 260mm | ||
Safety Category Voltage 600V, 690V | ||
Safety Category Level CAT IV, CAT III | ||
Model Number T130 | ||
Statut RoHS non applicable
- Pays d'origine :
- GB
Fluke Voltage Tester, 690V Maximum Voltage, AAA Battery Type - FLUKE T130
This voltage tester is a two-pole electrical tester designed to detect the presence or absence of AC/DC voltage and verify continuity in industrial and maintenance environments. It provides multiple indication methods to inform users of hazardous voltage, operates from AAA batteries, and is intended for field use where clear, Rapid verification of live conductors and RCD trip testing is required.
Features & Benefits
• Measures up to 690V AC/DC while indicating hazardous presence
• CAT IV 600V and CAT III 690V safety rating for high-energy sites
• Switchable load option reduces ghost voltage and limits RCD trips
• Backlit LCD and LED provide readable indications in low light
• Continuity check with audible on/off control for quiet areas
• IP64 ingress protection for dust resistance and water spray
• CAT IV 600V and CAT III 690V safety rating for high-energy sites
• Switchable load option reduces ghost voltage and limits RCD trips
• Backlit LCD and LED provide readable indications in low light
• Continuity check with audible on/off control for quiet areas
• IP64 ingress protection for dust resistance and water spray
**Applications**
• Suitable for commissioning and maintenance on 3-phase systems
• Ideal for electrical fault-finding and continuity verification
• Used for pre-work voltage checks before isolation procedures
• Can be used for RCD trip testing and verification
• Suitable for portable site inspections and field service tasks
• Ideal for electrical fault-finding and continuity verification
• Used for pre-work voltage checks before isolation procedures
• Can be used for RCD trip testing and verification
• Suitable for portable site inspections and field service tasks
How is the unit powered and how is low power indicated?
It runs on two AAA batteries and includes a low-battery indicator to warn when replacement is needed.
Which probe and cable characteristics improve on-site durability?
The dual-insulated leads are tested well beyond standard bend angles to withstand repeated flexing and strain typical of field use.
How does the tester assist in identifying phase rotation or live conductors?
It offers single-pole phase detection and a rotary field indicator intended for identifying phase sequence on three-phase systems.
What display and alert modes are available for different environments?
A backlit graduated scale, backlit LCD, LED indicators, audible tone and vibratory feedback provide selectable visual, audible or tactile alerts.
Liens connexes
- Fluke T130 690V ac/dc Continuity Check CAT III FLUKE T130
- Fluke T150 690V ac/dc Continuity Check CAT IV, FLUKE T150
- Fluke T110 690V ac/dc Continuity Check CAT III, FLUKE T110
- UNI-T UT18C 690V Continuity Check CAT III, UT18C
- Fluke T110 690V ac/dc Continuity Check CAT III FLUKE T110
- Fluke T150 690V ac/dc Continuity Check CAT IV FLUKE T150
- Sefram 1000V Continuity Check CAT IV, SEFRAM70
- Sefram 1000V Continuity Check CAT IV SEFRAM70