John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III RSCAL, DRUMTL10
- N° de stock RS:
- 706-8707
- Référence fabricant:
- DRUMTL10
- Fabricant:
- John Drummond
Sous-total (1 unité)*
161,92 €
(TVA exclue)
195,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 4 unité(s) expédiée(s) à partir du 03 avril 2026
- Plus 8 unité(s) expédiée(s) à partir du 01 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 161,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 706-8707
- Référence fabricant:
- DRUMTL10
- Fabricant:
- John Drummond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | John Drummond | |
| Product Type | Voltage Tester | |
| Display Type | LED | |
| IP Rating | IP67 | |
| Power Source | Mains | |
| Weight | 320g | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 55°C | |
| Maximum Voltage | 500V ac/dc | |
| Standards/Approvals | BS EN 61326-1 | |
| Hazardous Area Certification | No | |
| Width | 112 mm | |
| Height | 72mm | |
| Length | 213mm | |
| Safety Category Voltage | 1000V | |
| Calibrated | RSCAL | |
| Safety Category Level | CAT IV, CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque John Drummond | ||
Product Type Voltage Tester | ||
Display Type LED | ||
IP Rating IP67 | ||
Power Source Mains | ||
Weight 320g | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 55°C | ||
Maximum Voltage 500V ac/dc | ||
Standards/Approvals BS EN 61326-1 | ||
Hazardous Area Certification No | ||
Width 112 mm | ||
Height 72mm | ||
Length 213mm | ||
Safety Category Voltage 1000V | ||
Calibrated RSCAL | ||
Safety Category Level CAT IV, CAT III | ||
Statut RoHS : Exempté
- Pays d'origine :
- PH
Drummond Test Lamps MTL10
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required
Mains Voltage Indicators - Contact
Caution
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.
Supplied with
Carry case, right angled probe tip, two straight tips and instructions
Liens connexes
- John Drummond DRUMTL10 500V ac/dc CAT III 1000V
- John Drummond DRUMTL20 500V ac/dc CAT III 1000V With RS Calibration
- John Drummond DRUMTL20 500V ac/dc CAT III 1000V
- John Drummond MTL15 1000V ac/dc CAT IV With RS Calibration
- John Drummond MTL15 1000V ac/dc CAT IV
- Martindale MARVI-15000 1000V CAT IV
- John Drummond MTL15PD 3.5mA LCD
- Fluke T6-1000 1000V CAT III 1000V With RS Calibration