John Drummond, LED Voltage Tester, 500V ac/dc, Mains Powered CAT IV, CAT III, MTL20
- N° de stock RS:
- 706-8577
- Référence fabricant:
- MTL20
- Fabricant:
- John Drummond
Sous-total (1 unité)*
121,04 €
(TVA exclue)
146,46 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 8 unité(s) expédiée(s) à partir du 03 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 121,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 706-8577
- Référence fabricant:
- MTL20
- Fabricant:
- John Drummond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | John Drummond | |
| Product Type | Voltage Tester | |
| Display Type | LED | |
| IP Rating | IP67 | |
| Power Source | Mains | |
| Weight | 350g | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 55°C | |
| Maximum Voltage | 500V ac/dc | |
| Standards/Approvals | BS EN 61326-1 | |
| Hazardous Area Certification | No | |
| Height | 72mm | |
| Length | 213mm | |
| Width | 112 mm | |
| Safety Category Voltage | 1000V | |
| Safety Category Level | CAT IV, CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque John Drummond | ||
Product Type Voltage Tester | ||
Display Type LED | ||
IP Rating IP67 | ||
Power Source Mains | ||
Weight 350g | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 55°C | ||
Maximum Voltage 500V ac/dc | ||
Standards/Approvals BS EN 61326-1 | ||
Hazardous Area Certification No | ||
Height 72mm | ||
Length 213mm | ||
Width 112 mm | ||
Safety Category Voltage 1000V | ||
Safety Category Level CAT IV, CAT III | ||
Statut RoHS non applicable
- Pays d'origine :
- PH
Drummond Test Lamp MTL20
Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Additional two button test allows the unit to draw a high current to differentiate between potentially hazardous phantom voltages and hazardous persistent voltages
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required
Mains Voltage Indicators - Contact
Caution
Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.
Supplied with
Right angled probe tip, two straight tips and instructions
Liens connexes
- John Drummond DRUMTL20 500V ac/dc CAT III 1000V With RS Calibration
- John Drummond DRUMTL10 500V ac/dc CAT III 1000V
- John Drummond DRUMTL10 500V ac/dc CAT III 1000V With RS Calibration
- John Drummond MTL15 1000V ac/dc CAT IV
- John Drummond MTL15 1000V ac/dc CAT IV With RS Calibration
- Beha-Amprobe 2100-alpha 690V ac/dc Mains Powered, CAT III 690V
- Martindale MARVI-15000 1000V CAT IV
- Beha-Amprobe 2100-alpha 690V ac/dc Mains Powered, CAT III 690V With RS