SMC Vacuum Generator
- N° de stock RS:
- 183-1557
- Référence fabricant:
- ZH10DLA-06-06-08S
- Fabricant:
- SMC
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
31,34 €
(TVA exclue)
37,92 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 14 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 31,34 € |
| 5 - 9 | 29,77 € |
| 10 + | 28,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 183-1557
- Référence fabricant:
- ZH10DLA-06-06-08S
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Vacuum Generator | |
| Standards/Approvals | Conform to the European RoHS Directive | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Vacuum Generator | ||
Standards/Approvals Conform to the European RoHS Directive | ||
- Pays d'origine :
- JP
SMC Vacuum Generator, 1mm Nozzle Diameter - ZH10DLA-06-06-08S
This Compact vacuum generator provides pneumatic vacuum generation for automation and handling tasks using compressed Air as the driving medium. Designed in a body‑ported configuration, it incorporates one‑touch connections for supply, vacuum and exhaust, and is supplied with a mounting bracket and silencer to simplify installation in machine systems. Operating within common industrial temperature ranges, it is suited to integration where small bore tubing and Rapid connection are required.
Features & Benefits
• Nozzle Ø1.0mm delivers consistent vacuum extraction performance
• Maximum vacuum -48 kPa supports moderate‑hold handling tasks
• Flow rate 52 l/min (ANR) enables reasonable throughput for small assemblies
• One‑touch Ø6/Ø8 connections reduce installation time and leak points
• Works with nylon or polyurethane tubing for flexible routing options
• Maximum vacuum -48 kPa supports moderate‑hold handling tasks
• Flow rate 52 l/min (ANR) enables reasonable throughput for small assemblies
• One‑touch Ø6/Ø8 connections reduce installation time and leak points
• Works with nylon or polyurethane tubing for flexible routing options
Applications
• Suitable for pick‑and‑place of light components in assembly lines
• Ideal for end‑of‑arm tooling on robotic handlers using small bore tubing
• Used with pneumatic grippers for electronics board handling
• Can be used for vacuum clamping in small fixture stations
• Ideal for end‑of‑arm tooling on robotic handlers using small bore tubing
• Used with pneumatic grippers for electronics board handling
• Can be used for vacuum clamping in small fixture stations
What supply and exhaust connections does it use?
The unit uses one‑touch Ø8 for pneumatic input and one‑touch Ø8 for exhaust to Streamline tubing runs.
Which tubing materials are compatible with the device?
Nylon, soft nylon and polyurethane tubing are specified as suitable materials for the pneumatic circuits.
What are the permitted operating temperatures?
The device accepts pressure medium and ambient temperatures from -5 °C up to 50 °C for typical industrial environments.
Is there any included accessory to reduce noise and aid mounting?
A bracket and a silencer are provided to assist mounting and attenuate exhaust noise during operation.
Liens connexes
- SMC Vacuum Generator
- SMC Vacuum Generator -88 kPa 24 L/min, ZH series
- SMC for use with Polyurethane FEP Soft Nylon Vacuum Generator
- SMC Vacuum Generator -48 kPa 20 L/min, ZH series
- SMC Vacuum Generators
- SMC Vacuum Generator -88 kPa 12 L/min, ZH series
- SMC for use with ZM Series Vacuum Generators Vacuum Generator
- SMC Vacuum Generator -91 kPa 67 L/min, ZK2 series