FTDI Chip FT232RNL-REEL, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- N° de stock RS:
- 275-0036
- Référence fabricant:
- FT232RNL-REEL
- Fabricant:
- FTDI Chip
Offre groupée disponible
Sous-total (1 unité)*
4,76 €
(TVA exclue)
5,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 4,76 € |
| 10 - 49 | 4,27 € |
| 50 - 99 | 4,13 € |
| 100 - 1999 | 3,89 € |
| 2000 + | 2,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 275-0036
- Référence fabricant:
- FT232RNL-REEL
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Number of Transceivers | 1 | |
| Maximum Data Rate | 3Mbps | |
| Product Type | USB to Serial UART | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB to UART | |
| Maximum Operating Temperature | 85°C | |
| Series | FT232RNL | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Number of Transceivers 1 | ||
Maximum Data Rate 3Mbps | ||
Product Type USB to Serial UART | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB to UART | ||
Maximum Operating Temperature 85°C | ||
Series FT232RNL | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 7mA | ||
- Pays d'origine :
- CN
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection