FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- N° de stock RS:
- 275-0035
- Référence fabricant:
- FT232RNL-REEL
- Fabricant:
- FTDI Chip
Sous-total (1 bobine de 2000 unités)*
4 776,00 €
(TVA exclue)
5 778,00 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2000 + | 2,388 € | 4 776,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 275-0035
- Référence fabricant:
- FT232RNL-REEL
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Product Type | USB to Serial UART | |
| Number of Transceivers | 1 | |
| Maximum Data Rate | 3Mbps | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 1.8V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB to UART | |
| Maximum Operating Temperature | 85°C | |
| Series | FT232RNL | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 7mA | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Product Type USB to Serial UART | ||
Number of Transceivers 1 | ||
Maximum Data Rate 3Mbps | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 1.8V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB to UART | ||
Maximum Operating Temperature 85°C | ||
Series FT232RNL | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 7mA | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection
Liens connexes
- FTDI Chip FT232RNL-REEL 1-Channel 3 Mbps USB to UART 28-Pin SSOP
- FTDI Chip FT232RNL-TUBE 28-Channel 3.14 Mbps USB 2.0, 1.8 V
- FTDI Chip 5.25V 3.3 V, 28-Pin SSOP
- FTDI Chip FT245RL-REEL 5.25V 3.3 V, 28-Pin SSOP
- FTDI Chip FT232RNQ-TRAY 28-Channel 3.14 Mbps USB to UART 32-Pin QFN-32
- FTDI Chip 1-Channel UART SIE, UART 16-Pin SSOP
- FTDI Chip 1-Channel UART UART, SIE 16-Pin SSOP
- FTDI Chip 1-Channel 3.4 Mbps UART USB 2.0 1.8 V, 28-Pin WQFN