FTDI Chip, UART 8.38 Mbps, 5.25V, USB 2.0, 3.3 V, 28-Pin SSOP
- N° de stock RS:
- 170-9062
- Référence fabricant:
- FT245RL-REEL
- Fabricant:
- FTDI Chip
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
L'unité (dans un tube de 47)
154,77 €
(TVA exclue)
187,27 €
(TVA incluse)
- N° de stock RS:
- 170-9062
- Référence fabricant:
- FT245RL-REEL
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Maximum Data Rate | 8.38Mbps | |
| Product Type | UART | |
| USB Specification | USB 2.0 | |
| Sub Type | Controller | |
| ESD Protection | No | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Supply Voltage | 5.25V | |
| Mount Type | Surface | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Supported Protocols | USB 2.0 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Series | FT245R | |
| Standards/Approvals | No | |
| Length | 10.2mm | |
| Height | 1.75mm | |
| Supply Current | 15mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Maximum Data Rate 8.38Mbps | ||
Product Type UART | ||
USB Specification USB 2.0 | ||
Sub Type Controller | ||
ESD Protection No | ||
Minimum Supply Voltage 3.3V | ||
Maximum Supply Voltage 5.25V | ||
Mount Type Surface | ||
Package Type SSOP | ||
Pin Count 28 | ||
Supported Protocols USB 2.0 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Series FT245R | ||
Standards/Approvals No | ||
Length 10.2mm | ||
Height 1.75mm | ||
Supply Current 15mA | ||
Automotive Standard No | ||
FT245B, FT245R, USB to FIFO Converters, FTDI Chip
The FT245B and FT245R are USB to parallel FIFO converter interfaces.
Single chip USB to parallel FIFO bidirectional data transfer Interface
Entire USB protocol handled on the chip - No USB-specific firmware programming required
FT245B USB compatible
FT245R USB 2.0 Full Speed compatible
FT245R with the FTDIChip-ID security dongle feature

