Microchip, Controller IC, 1-Channel 5 Gbps, 3.6 V, USB 3.0, 1.2 V, 64-Pin SQFN

Voir la catégorie

Sous-total (1 plateau de 260 unités)*

1 532,18 €

(TVA exclue)

1 854,06 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • Expédition à partir du 23 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le plateau*
260 +5,893 €1 532,18 €

*Prix donné à titre indicatif

N° de stock RS:
165-4285
Référence fabricant:
USB5734-I/MR
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Maximum Data Rate

5Gbps

Number of Transceivers

1

Product Type

Controller IC

USB Specification

USB 2.0

Sub Type

Controller

Power Supply Type

Single

ESD Protection

Yes

Maximum Supply Voltage

3.6V

Minimum Supply Voltage

1.2V

Mount Type

Surface

Package Type

SQFN

Pin Count

64

Minimum Operating Temperature

-40°C

Dual Supply Voltage

3.3V

Supported Protocols

USB 3.0

Maximum Operating Temperature

85°C

Standards/Approvals

No

Length

9mm

Height

1mm

Width

9 mm

Series

USB5734

Automotive Standard

No

Pays d'origine :
TH

USB5734 USB 3.0 Hub Controllers


From Microchip the USB5734 is a 3.0 compliant (also known as USB 3.1 Gen 1) and supports all the defined USB speeds up to the 5 Gbps SuperSpeed (SS) data rate on all enabled downstream ports. The device integrates a USB 2.0 controller to decouple SuperSpeed data from slower USB 2.0 traffic to avoid bottlenecks slower USB 2.0 traffic can create.

The USB5734 integrates functions that would typically be associated with a separate MCU or processor; as such Microchip classifies this device as a ’Smart Hub’. For example the device can communicate to peripherals via I2C, SPI, GPIOs or UART in addition to USB. Also a downstream device can take control of the host system by swapping roles to become the host port, with the Smart Hub switching between two different hosts if required.

Features


Four downstream USB 3.0 (USB 3.1 Gen1)/2.0 ports

Integrated Hub Feature Controller (HFC) enabling I/O bridging and FlexConnect

I/O Bridging: Host communication to external peripherals - USB to I2C/UART/SPI/GPIO

FlexConnect: Host port swapping and switching to downstream devices

Battery Charging: USB-IF revision 1.2 support on downstream ports (DCP, CDP, SDP)

Simultaneous data transfer for 2500 mA of high speed charging

Port Configuration Straps: Predefined configuration of port settings – Battery Charging, Non-Removable, Disable

Application Straps: Predefined configuration of GPIOs for specific Use Cases including Mixed Mode, FlexConnect Mode, Port Speed mode, Port BC Mode and UART Mode.

ProTouch2: Configuration tool to enable enhanced OEM configuration options through either One-Time Programmable (OTP) (8Kbit) or external SPI ROM

Manufacturing line programming tool and field update capabilities

USB Link Power Management (LPM) support

IETF RFC 4122 compliant 128-bit UUID

Compatible with Microsoft® Windows® 8/8.1 and other major OS’s

USB (Universal Serial Bus) - Microchip


Liens connexes