FTDI Chip FT601Q-B-T, USB Bridge IC, 2-Channel, 480 Mbps, 5Gbit/s, USB 2.0, USB 3.0, 3.3 V, 76-Pin QFN
- N° de stock RS:
- 146-6840
- Référence fabricant:
- FT601Q-B-T
- Fabricant:
- FTDI Chip
Sous-total (1 unité)*
8,53 €
(TVA exclue)
10,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 107 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 510 unité(s) expédiée(s) à partir du 02 janvier 2026
- Plus 2 080 unité(s) expédiée(s) à partir du 04 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 8,53 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 146-6840
- Référence fabricant:
- FT601Q-B-T
- Fabricant:
- FTDI Chip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FTDI Chip | |
| Number of Transceivers | 2 | |
| Data Rate | 480 Mbps, 5Gbit/s | |
| IC Type | Transceiver IC | |
| Protocols Supported | USB 2.0, USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Typical Single Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 76 | |
| Dimensions | 9.1 x 9.1 x 0.95mm | |
| Height | 0.95mm | |
| Length | 9.1mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Width | 9.1mm | |
| Sélectionner tout | ||
|---|---|---|
Marque FTDI Chip | ||
Number of Transceivers 2 | ||
Data Rate 480 Mbps, 5Gbit/s | ||
IC Type Transceiver IC | ||
Protocols Supported USB 2.0, USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 76 | ||
Dimensions 9.1 x 9.1 x 0.95mm | ||
Height 0.95mm | ||
Length 9.1mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
Width 9.1mm | ||
Enabling faster and higher volume data transfers than ever before, the FT600 and FT601 Super Speed USB3.0 ICs offer USB access to a wider range of data intensive imaging and data acquisition applications. The series incorporates two vendor class USB devices supported by our D3xx driver. The FT600 and FT601 function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth. devices - the FT600 and FT601, which function as Super Speed USB3.0 to FIFO bridges, providing up to 5Gbps of bandwidth.
16bit/32bit wide parallel FIFO interface.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Supports 2 parallel slave FIFO bus protocols, with data bursting rate up to 400MBps.
Supports multi channel FIFO interface.
Up to 8 configurable endpoints (pipes).
Built-in 16kB FIFO data buffer RAM.
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
Configurable GPIO support.
Supports Remote Wakeup capability.
Provides USB Battery Charger Detection.
Integrated power-on-reset circuit.
Liens connexes
- FTDI Chip FT601Q-B-T 2-Channel 5Gbit/s USB 3.0 76-Pin QFN
- FTDI Chip FT600Q-B-T 2-Channel 5Gbit/s USB 3.0 56-Pin QFN
- FTDI Chip FT2233HPQ-TRAY 2-Channel USB 2.0 76-Pin QFN-76
- FTDI Chip FT602Q-B-T 480Mbps 3.3 V, 76-Pin QFN
- FTDI Chip FT4233HPQ-TRAY 4-Channel USB 2.0 76-Pin QFN-76
- FTDI Chip FT231XQ-T USB 2.0 20-Pin QFN
- FTDI Chip FT240XQ-T USB 2.0 24-Pin QFN
- FTDI Chip FT312D-32Q1C-T 3.3 V, 32-Pin QFN
