Honeywell Toggle Switch, Bushing Mount, On-On, DPDT, Wire Terminal, 28 V dc, 125 V ac
- N° de stock RS:
- 212-5172
- Référence fabricant:
- 102TL2-3
- Fabricant:
- Honeywell
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
532,34 €
(TVA exclue)
644,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 07 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 532,34 € |
| 5 - 9 | 517,43 € |
| 10 + | 503,59 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 212-5172
- Référence fabricant:
- 102TL2-3
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Product Type | Toggle Switch | |
| Contact Configuration | DPDT | |
| Switch Operation | On-On | |
| Switch Contact Current | 20A | |
| Mount Type | Bushing | |
| Terminal Type | Wire | |
| Illuminated | No | |
| Contact DC Voltage | 28V dc | |
| Actuator Length | 17.27mm | |
| Minimum Operating Temperature | 71°C | |
| Contact AC Voltage | 125V ac | |
| Maximum Operating Temperature | -65°C | |
| Switch Configuration | On-On | |
| Width | 33.5mm | |
| Series | TL | |
| Standards/Approvals | CSA, CE, UL | |
| Height | 26.7mm | |
| Length | 30mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Product Type Toggle Switch | ||
Contact Configuration DPDT | ||
Switch Operation On-On | ||
Switch Contact Current 20A | ||
Mount Type Bushing | ||
Terminal Type Wire | ||
Illuminated No | ||
Contact DC Voltage 28V dc | ||
Actuator Length 17.27mm | ||
Minimum Operating Temperature 71°C | ||
Contact AC Voltage 125V ac | ||
Maximum Operating Temperature -65°C | ||
Switch Configuration On-On | ||
Width 33.5mm | ||
Series TL | ||
Standards/Approvals CSA, CE, UL | ||
Height 26.7mm | ||
Length 30mm | ||
Statut RoHS non applicable
Honeywell Series TL Toggle Switch, 20A Switch Contact Current, 125V AC Contact Ac Voltage - 102TL2-3
This toggle switch provides a compact, manual switching solution for industrial and electronic control panels, offering a two-position changeover for dual-circuit control. It is designed for panel mounting with a bushing arrangement and is suited to environments where a non‑illuminated, mechanically simple selector is required.
Features and Benefits:
• DPDT contact arrangement enables switching of two separate circuits simultaneously
• Rated for 20A current to support higher-load circuits
• 125V AC contact rating for mains‑level switching applications
• 28V DC contact rating for low‑voltage control circuits
• IWTS Terminal style for robust and secure wire connection
• Operable between -65°C and 71°C for wide ambient temperature use
• Rated for 20A current to support higher-load circuits
• 125V AC contact rating for mains‑level switching applications
• 28V DC contact rating for low‑voltage control circuits
• IWTS Terminal style for robust and secure wire connection
• Operable between -65°C and 71°C for wide ambient temperature use
Applications
• Suitable for motor control panels requiring dual‑pole switching
• Ideal for changeover in industrial machinery control circuits
• Used with generator transfer systems for circuit selection
• Can be used for manual isolation in test rigs and benchtop setups
• Suitable for electrical distribution boards needing Compact selectors
• Ideal for changeover in industrial machinery control circuits
• Used with generator transfer systems for circuit selection
• Can be used for manual isolation in test rigs and benchtop setups
• Suitable for electrical distribution boards needing Compact selectors
What mounting arrangement is required for installation?
The component uses a bushing mount so it fits through a panel cut‑out and secures externally.
How does the actuator size affect usability?
The 17.27mm actuator length provides a clear tactile lever for positive manual operation without excessive protrusion.
Which approvals indicate its suitability for regulated installations?
It holds approvals from recognised standards bodies including CSA, CE and UL, indicating compliance with multiple certification regimes.
Is the switch illuminated for status indication?
No, the unit is non‑illuminated and relies on mechanical position for state identification.
What switching action is provided by the mechanism?
It offers an On‑On operation allowing two stable positions for alternate circuit connection.
Liens connexes
- Honeywell Toggle Switch On-On-On Wire Terminal 125 V ac
- Honeywell Toggle Switch On-On Wire Terminal 125 V ac
- Honeywell Toggle Switch On-On-On Screw Terminal 125 V ac
- Honeywell Toggle Switch On-On Screw Terminal 125 V ac
- Honeywell Toggle Switch Latching Screw Terminal 125 V ac
- Honeywell Toggle Switch On-Off-On Screw Terminal 125 V ac
- Honeywell Toggle Switch On-On Wire Terminal 125 V ac
- Honeywell Toggle Switch On-On Wire Terminal 125 V ac