Tedea Huntleigh Model 1260 Series Single Point Load Cell, 50 kg, Compression Measure, 75 kg
- N° de stock RS:
- 185-6018
- Référence fabricant:
- 01260-075K-C3-52X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
204,27 €
(TVA exclue)
247,17 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 204,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-6018
- Référence fabricant:
- 01260-075K-C3-52X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1260 | |
| Sensor Type | Single Point | |
| Terminal Type | Cable | |
| Mount Type | Direct | |
| IP Rating | IP66 | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 63.3mm | |
| Minimum Force/Load Measurement | 50kg | |
| Minimum Operating Temperature | -20°C | |
| Maximum Force/Load Measurement | 75kg | |
| Maximum Operating Temperature | 70°C | |
| Length | 62.3mm | |
| Depth | 63.3mm | |
| Standards/Approvals | NTEP, OIML R60, ATEX, IECEX, RoHS Compliant, FM | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1260 | ||
Sensor Type Single Point | ||
Terminal Type Cable | ||
Mount Type Direct | ||
IP Rating IP66 | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 63.3mm | ||
Minimum Force/Load Measurement 50kg | ||
Minimum Operating Temperature -20°C | ||
Maximum Force/Load Measurement 75kg | ||
Maximum Operating Temperature 70°C | ||
Length 62.3mm | ||
Depth 63.3mm | ||
Standards/Approvals NTEP, OIML R60, ATEX, IECEX, RoHS Compliant, FM | ||
Model 1260 is a high performance, high capacity single-point load cell designed for direct mounting of large platforms. The rugged construction offers high immunity to side forces making it suitable for a wide range of weighing applications, including bench scales and check weighing. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. For hazardous environments this load cell has an ATEX and FM approval. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into appropriate electronics.
Capacities 50–635 kg
Aluminium construction
Single-point 600 x 600 mm platform
Applications
Large platform scales
Hanging scales
Check weighing
Liens connexes
- Tedea Huntleigh Model 1010 Series Load Cell Compression Measure, 20 kg
- Tedea Huntleigh Model 1010 Series Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1015 Series Load Cell Compression Measure, 50 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 1500 kg
- Tedea Huntleigh Model 3410 Series Low Profile Load Cell Compression Measure 385Ω
- Tedea Huntleigh Model 9363 Series Load Cell Compression Measure, 500 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 150 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 300 kg