Tedea Huntleigh Model 1010 Series Load Cell, 3 kg, Compression Measure, 20 kg
- N° de stock RS:
- 185-5985
- Référence fabricant:
- 01010-020K-G0-52X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
119,69 €
(TVA exclue)
144,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 8 unité(s) expédiée(s) à partir du 21 juillet 2026
- Plus 9 unité(s) expédiée(s) à partir du 25 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 119,69 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-5985
- Référence fabricant:
- 01010-020K-G0-52X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1010 | |
| Terminal Type | Cable | |
| IP Rating | IP65 | |
| Maximum AC Voltage | 15V ac | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Aluminium | |
| Width | 33.5mm | |
| Minimum Force/Load Measurement | 3kg | |
| Minimum Operating Temperature | -20°C | |
| Maximum Force/Load Measurement | 20kg | |
| Maximum Operating Temperature | 70°C | |
| Depth | 33.5mm | |
| Length | 66mm | |
| Standards/Approvals | RoHS Compliant, OIML, NTEP | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1010 | ||
Terminal Type Cable | ||
IP Rating IP65 | ||
Maximum AC Voltage 15V ac | ||
Maximum DC Voltage 15V dc | ||
Housing Material Aluminium | ||
Width 33.5mm | ||
Minimum Force/Load Measurement 3kg | ||
Minimum Operating Temperature -20°C | ||
Maximum Force/Load Measurement 20kg | ||
Maximum Operating Temperature 70°C | ||
Depth 33.5mm | ||
Length 66mm | ||
Standards/Approvals RoHS Compliant, OIML, NTEP | ||
Model 1010 is a single-point load cell designed for direct mounting of low cost, low capacity weighing platforms. Its use in large platforms, combined with its high accuracy and low cost, makes this load cell ideally suited for a large range of weighing applications, including bench scales and counting scales. A special humidity resistant protective coating is available which ensures long-term reliability. Model 1010’s built-in overload stop can provide mechanical protection against overloading. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension is achieved by feeding this voltage into the appropriate electronics.
Capacities 3–90 kg
Aluminium construction
Single-point 400 x 400 mm platform
Applications
Bench scales
Counting scales
Grocery scales