Tedea Huntleigh Model 1242 Series Low Profile Load Cell, 50 kg, Compression Measure, 200 kg
- N° de stock RS:
- 185-6010
- Référence fabricant:
- 01242-200K-C3-10X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
116,68 €
(TVA exclue)
141,18 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 17 août 2026
- Plus 4 unité(s) expédiée(s) à partir du 13 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 116,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-6010
- Référence fabricant:
- 01242-200K-C3-10X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1242 | |
| Sensor Type | Low Profile | |
| Terminal Type | Cable | |
| Mount Type | Hole, Threaded | |
| IP Rating | IP66 | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 38mm | |
| Minimum Operating Temperature | -20°C | |
| Minimum Force/Load Measurement | 50kg | |
| Maximum Force/Load Measurement | 200kg | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | NTEP, RoHS Compliant, ATEX, FM, IECEX, OIML R60 | |
| Length | 38mm | |
| Depth | 38mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1242 | ||
Sensor Type Low Profile | ||
Terminal Type Cable | ||
Mount Type Hole, Threaded | ||
IP Rating IP66 | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 38mm | ||
Minimum Operating Temperature -20°C | ||
Minimum Force/Load Measurement 50kg | ||
Maximum Force/Load Measurement 200kg | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals NTEP, RoHS Compliant, ATEX, FM, IECEX, OIML R60 | ||
Length 38mm | ||
Depth 38mm | ||
Model 1242 is a high accuracy, low profile, low cost, two-beam, single-point load cell ideally suited for industrial application where space is limited. Typical applications include platforms, hanging scales and personal weighers. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension can be achieved by feeding this voltage into the appropriate electronics.
Capacities 50–250 kg
Aluminium construction
Single-point 400 x 400 mm platform
Applications
Small platforms
Hanging scales
Personal scales
Liens connexes
- Tedea Huntleigh Model 1242 Series Low Profile Load Cell Compression Measure, 250 kg
- Tedea Huntleigh Model 1242 Series Low Profile Load Cell Compression Measure, 100 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 1500 kg
- Tedea Huntleigh Model 355 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 1130 Series Low Profile Load Cell Compression Measure, 15 kg
- Tedea Huntleigh Load Cell Compression Measure
- Tedea Huntleigh Model 240 Series Load Cell Load Cell Compression Measure, 50 kg