Tedea Huntleigh Model 1130 Series Low Profile Load Cell, 7 kg, Compression Measure, 15 kg
- N° de stock RS:
- 185-6004
- Référence fabricant:
- 01130-015K-C3-10X
- Fabricant:
- Tedea Huntleigh
Sous-total (1 unité)*
287,36 €
(TVA exclue)
347,71 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 07 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 287,36 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-6004
- Référence fabricant:
- 01130-015K-C3-10X
- Fabricant:
- Tedea Huntleigh
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1130 | |
| Sensor Type | Low Profile | |
| Terminal Type | Cable | |
| IP Rating | IP66 | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Stainless Steel | |
| Width | 25mm | |
| Minimum Operating Temperature | -20°C | |
| Minimum Force/Load Measurement | 7kg | |
| Maximum Force/Load Measurement | 15kg | |
| Maximum Operating Temperature | 70°C | |
| Length | 30mm | |
| Standards/Approvals | NTEP, OIML R60, IECEX, RoHS Compliant, FM, ATEX | |
| Depth | 25mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1130 | ||
Sensor Type Low Profile | ||
Terminal Type Cable | ||
IP Rating IP66 | ||
Maximum DC Voltage 15V dc | ||
Housing Material Stainless Steel | ||
Width 25mm | ||
Minimum Operating Temperature -20°C | ||
Minimum Force/Load Measurement 7kg | ||
Maximum Force/Load Measurement 15kg | ||
Maximum Operating Temperature 70°C | ||
Length 30mm | ||
Standards/Approvals NTEP, OIML R60, IECEX, RoHS Compliant, FM, ATEX | ||
Depth 25mm | ||
Model 1130 is a low profile stainless steel single-point load cell ideally designed for direct mounting in bench and platform scales, packaging and process weighing equipment, and is built to perform in harsh environments. The small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for low profile bench and counting scales. A special humidity resistant protective coating assures long-term stability over the entire compensated temperature range. Constructed in stainless steel. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extension, is acheived by feeding this voltage into the appropriate electronics.
Capacities 7–100 kg
Stainless steel construction
Single-point 400 x 400 mm platform
Applications
Harsh environment small platforms
Harsh environment check weighing
Liens connexes
- Tedea Huntleigh Model 1130 Series Low Profile Load Cell Compression Measure, 50 kg
- Tedea Huntleigh Model 1130 Series Low Profile Load Cell Compression Measure 385Ω
- Tedea Huntleigh Model 1040 Series Low Profile Load Cell Compression Measure, 15 kg
- Tedea Huntleigh Model 1242 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 9363 Series Load Cell Compression Measure, 500 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 150 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 300 kg
- Tedea Huntleigh Model 1010 Series Load Cell Compression Measure, 20 kg