Moflash LEDA125 Series Amber Beacon-Buzzer Combination, IP65 280V Wall, Surface 90 dB @ 1m Buzzer

N° de stock RS:: 674-2016
Référence fabricant:: LEDA125-04-01
Fabricant:: Moflash

Moflash LEDA125 Series Amber Beacon-Buzzer Combination, IP65 280V Wall, Surface 90 dB @ 1m Buzzer

Sous-total (1 unité)*

152,44 €

(TVA exclue)

184,45 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

1 unité(s) expédiée(s) à partir du 25 août 2026
Plus 10 unité(s) expédiée(s) à partir du 31 août 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	152,44 €

*Prix donné à titre indicatif

N° de stock RS:: 674-2016
Référence fabricant:: LEDA125-04-01
Fabricant:: Moflash

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Moflash
	Product Type	Beacon-Buzzer Combination
	Lens Colour	Amber
	Current Type	AC
	Light Effect	Flashing, Steady
	Mount Type	Wall, Surface
	Sounder Type	Buzzer
	Series	LEDA125
	Bulb Type	LED
	Maximum Supply Voltage	280V
	Housing Colour	Black
	Sound Level at 1m	90dB
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	55°C
	Maximum Sound Level	90dB
	Number of Tones	1
	IP Rating	IP65
	Hazardous Area Certification	No
	Housing Material	ABS/Polycarbonate
	Standards/Approvals	CE Certified UKCA

	Sélectionner tout
	Marque Moflash
	Product Type Beacon-Buzzer Combination
	Lens Colour Amber
	Current Type AC
	Light Effect Flashing, Steady
	Mount Type Wall, Surface
	Sounder Type Buzzer
	Series LEDA125
	Bulb Type LED
	Maximum Supply Voltage 280V
	Housing Colour Black
	Sound Level at 1m 90dB
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 55°C
	Maximum Sound Level 90dB
	Number of Tones 1
	IP Rating IP65
	Hazardous Area Certification No
	Housing Material ABS/Polycarbonate
	Standards/Approvals CE Certified UKCA

Pays d'origine :: GB

Moflash Yellow Buzzer Beacon, Wall Mount, 90dB - LEDA125 Series - LEDA125-04-01

This Moflash buzzer beacon provides an audible and visual signal to alert you in case of fire, security breaches or other emergency situations. The beacon has three light modes: continuously ON, rapid flash (120Hz) and standard flash (60Hz). Select which one you want via a DIP (dual in-line package) switch mounted on the lens side on the printed circuit board (PCB). The base of the beacon/buzzer houses two piezo sounders that are synchronised to the light mode. This means the alarm sound and flash fire at the same time, making for a highly noticeable signal.

Features and Benefits

• Loud 90dB alarm sound is noticeable even in noisy settings

• Yellow lens for high visibility

• Wide operating temperature range of -20°C to +45°C to cope with a variety of environments

Application Information

• Office buildings

• Construction sites

• Laboratories

• Cold-storage units

How loud is this sounder beacon compared to normal background noise?

The volume of a sounder beacon is normally between 5 and 15 decibels (dB) above ambient noise level. This may vary depending on the number of staff, the noise of machinery and the size of the area you're covering.

Compact LED Beacon / Buzzer Combination

The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one

100000 hours life for LED

Continuously rated

48 LED array ultra bright

360° visibility

Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)

3 point fixing

UV stable polycarbonate lens and ABS base

IP65 protection

RoHS compliant

CE marking

LED/Buzzer

Note

Piezos cannot be controlled independently from the light.