Moflash LEDA125 Series Red Beacon-Buzzer Combination, IP65 280V ac Surface, Wall 90 dB @ 1m

Voir l’ensemble des Sounder Beacons

Sous-total (1 unité)*

152,44 €

(TVA exclue)

184,45 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +152,44 €

*Prix donné à titre indicatif

N° de stock RS:
674-2012
Référence fabricant:
LEDA125-04-02
Fabricant:
Moflash
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Moflash

Product Type

Beacon-Buzzer Combination

Lens Colour

Red

Current Type

AC

Light Effect

Flashing, Steady

Mount Type

Surface, Wall

Sounder Type

Buzzer

Series

LEDA125

Bulb Type

LED

Maximum Supply Voltage

280V ac

Minimum Operating Temperature

-20°C

Housing Colour

Black

Sound Level at 1m

90dB

Maximum Operating Temperature

55°C

Maximum Sound Level

90dB

IP Rating

IP65

Hazardous Area Certification

No

Number of Tones

1

Standards/Approvals

CE Certified UKCA

Housing Material

ABS/Polycarbonate

Moflash Red Buzzer Beacon, 230V AC, 90dB - LEDA125 Series - LEDA125-04-02


Enhance safety in your workplace with this red buzzer beacon from Moflash. The LED (light-emitting diode) bulb rotates around the vertical axis to create a continuous flashing effect with a 360° reach for broad visibility. The buzzer emits an audible alert at the same time to provide an additional indicator of a hazard. It produces a volume of up to 90dB (decibels) at 1m, making it easy to hear at a distance. The base plate houses dual circuit boards for the buzzer and light that fit securely into the enclosure for protection against moisture and wear.

Features & Benefits


• Wide operating temperature range of -20°C to +55°C for use in extreme industrial environments

• Flame-retardant ABS (acrylonitrile butadiene styrene) housing material helps prevent the spread of flames in case of a fire

• Polycarbonate lens material is resistant to UV (ultraviolet) rays for outdoor use

• IP65 (ingress protection) rating means the unit can withstand exposure to low-pressure water jets and dust

Applications


• Factory assembly lines

• Fire safety

• Testing facilities

How fast does this light flash?


The light has three modes, so you can choose the most suitable mode for your application. There's a steady light, a standard flash at 60FPM (flashes per minute) and a rapid flash at 90FPM.

Compact LED Beacon / Buzzer Combination


The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one

100000 hours life for LED

Continuously rated

48 LED array ultra bright

360° visibility

Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)

3 point fixing

UV stable polycarbonate lens and ABS base

IP65 protection

RoHS compliant

CE marking

LED/Buzzer


Note

Piezos cannot be controlled independently from the light.

Liens connexes