SKF NKX 50 Z 50 mm ID Roller Bearing Needle, 70 mm OD
- N° de stock RS:
- 207-8769
- Référence fabricant:
- NKX 50 Z
- Fabricant:
- SKF
Sous-total (1 unité)*
191,07 €
(TVA exclue)
231,19 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 4 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 191,07 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-8769
- Référence fabricant:
- NKX 50 Z
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Race Width | 35mm | |
| Bore Type | Round | |
| Roller Material | Steel | |
| Standards/Approvals | ISO - F6 (Fw) + E8 (d) | |
| Series | NKX 50 Z | |
| Limiting Speed | 3600rpm | |
| Number of Rows | 1 | |
| Internal Clearance | Normal | |
| Bearing Material | Steel | |
| Static Load Rating | 81.5kN | |
| Outside Diameter | 70mm | |
| Dynamic Load Rating | 38kN | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Race Width 35mm | ||
Bore Type Round | ||
Roller Material Steel | ||
Standards/Approvals ISO - F6 (Fw) + E8 (d) | ||
Series NKX 50 Z | ||
Limiting Speed 3600rpm | ||
Number of Rows 1 | ||
Internal Clearance Normal | ||
Bearing Material Steel | ||
Static Load Rating 81.5kN | ||
Outside Diameter 70mm | ||
Dynamic Load Rating 38kN | ||
Bearing Type Needle | ||
SKF Roller Bearing, Combined Needle Roller and Thrust Ball Bearing Type, Cylindrical Bore, 50mm ID, 71.5mm OD - NKX 50 Z
When you need the stability of needle rollers but the support capacity of a thrust ball bearing, take a spin with this dual-component combination from SKF. It's a reliable choice for applications that experience both radial and axial loads in one direction. Thanks to a low cross-sectional height of just 71.5mm, this is space-saving choice for settings where other locating bearings don't fit. For lasting performance, the thrust section has a durable stamped-steel cover to retain grease around the rolling parts, keeping them in tip-top condition for longer.
Features & Benefits
• Rollers and balls are secured in cages to reduce noise and minimise wear
• High static load rating of 81.5kN (axial) and dynamic load rating of 38kN (radial), so handles demanding tasks
• Reference speed of 4300r/min makes it ideal for use in medium-velocity applications
Applications
• Domestic appliances
• Aerospace engineering
• Mining industry
Do I need a separate inner ring for this bearing?
Needle roller bearings can be fitted directly onto a shaft, so this product typically doesn't need a separate inner ring. However, if you're using a mating surface that can't be hardened and ground, simply add SKF's IR 45X50X25 ring (209-2227) and you're good to go.
Liens connexes
- SKF NKX 70 Z 70 mm ID Roller Bearing Needle, 95 mm OD
- SKF NKX 70 70 mm ID Roller Bearing Needle Roller 85 mm OD
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball 47 mm OD
- SKF NKX 25 Z 25 mm ID Roller Bearing Needle, 43.2 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 60 Z 60 mm ID Roller Bearing Thrust Ball 72 mm OD
- SKF NKX 20 Z 20 mm ID Roller Bearing Needle Roller 30 mm OD
- SKF NKX 12 Z 12 mm ID Roller Bearing Needle Roller 21 mm OD