SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball, Needle Roller, 47 mm OD
- N° de stock RS:
- 587-712
- Référence fabricant:
- NKX 35 Z
- Fabricant:
- SKF
Sous-total (1 paquet de 10 unités)*
947,06 €
(TVA exclue)
1 145,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 29 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Paquet(s) | le paquet | Prix par unité* |
|---|---|---|
| 1 + | 947,06 € | 94,706 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 587-712
- Référence fabricant:
- NKX 35 Z
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Needle Roller Bearing | |
| Inside Diameter | 35mm | |
| Race Width | 30mm | |
| Standards/Approvals | RoHS | |
| Bearing Material | Bearing Steel | |
| Static Load Rating | 45kN | |
| Outside Diameter | 47mm | |
| Dynamic Load Rating | 24.6kN | |
| Series | NKX 35 Z | |
| Limiting Speed | 4500rpm | |
| Bearing Type | Thrust Ball, Needle Roller | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Needle Roller Bearing | ||
Inside Diameter 35mm | ||
Race Width 30mm | ||
Standards/Approvals RoHS | ||
Bearing Material Bearing Steel | ||
Static Load Rating 45kN | ||
Outside Diameter 47mm | ||
Dynamic Load Rating 24.6kN | ||
Series NKX 35 Z | ||
Limiting Speed 4500rpm | ||
Bearing Type Thrust Ball, Needle Roller | ||
- Pays d'origine :
- DE
The SKF Radial needle roller bearing combined with a thrust ball bearing can accommodate both radial loads and axial loads in one direction. In addition, they can operate at relatively high speeds. Their low cross-sectional height makes the bearings particularly suitable for applications where other types of locating bearing arrangements occupy too much space. The thrust part is capped with a cover that forms a gap-type seal to retain the grease in the bearings.
High load carrying capacity
Relatively high speed capability
Low cross section
Non separable design
Liens connexes
- SKF NKX 15 Z 15 mm ID Combined Needle Roller & Thrust Ball Bearing Thrust Ball 24 mm OD
- SKF NKX 20 20 mm ID Combined Needle Roller & Thrust Ball Bearing Thrust Ball 35 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 60 Z 60 mm ID Roller Bearing Thrust Ball 72 mm OD
- SKF NKX 20 Z 20 mm ID Roller Bearing Needle Roller 30 mm OD
- SKF NKX 12 Z 12 mm ID Roller Bearing Needle Roller 21 mm OD
- SKF NKX 40 Z 40 mm ID Roller Bearing Needle Roller 52 mm OD
- SKF NKX 45 Z 45 mm ID Roller Bearing Thrust Ball 58 mm OD