SKF NKX 25 Z 25 mm ID Roller Bearing Needle, 43.2 mm OD
- N° de stock RS:
- 207-8765
- Référence fabricant:
- NKX 25 Z
- Fabricant:
- SKF
Sous-total (1 unité)*
93,31 €
(TVA exclue)
112,91 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 93,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 207-8765
- Référence fabricant:
- NKX 25 Z
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 30mm | |
| Bore Type | Round | |
| Roller Material | Steel | |
| Bearing Material | Steel | |
| Static Load Rating | 32.5kN | |
| Number of Rows | 1 | |
| Series | NKX 25 Z | |
| Limiting Speed | 5500rpm | |
| Standards/Approvals | ISO - F6 (Fw) + E8 (d) | |
| Dynamic Load Rating | 19kN | |
| Outside Diameter | 43.2mm | |
| Bearing Type | Needle | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 30mm | ||
Bore Type Round | ||
Roller Material Steel | ||
Bearing Material Steel | ||
Static Load Rating 32.5kN | ||
Number of Rows 1 | ||
Series NKX 25 Z | ||
Limiting Speed 5500rpm | ||
Standards/Approvals ISO - F6 (Fw) + E8 (d) | ||
Dynamic Load Rating 19kN | ||
Outside Diameter 43.2mm | ||
Bearing Type Needle | ||
SKF Roller Bearing, Combined Needle Roller And Sealed Thrust Ball Bearing, 25mm ID, 43.2mm OD - NKX 25 Z
Looking for a bearing that can cope with high turning speeds? This roller bearing from SKF is just the thing. By slipping this unit on a 25mm-wide axle, you get a nifty assembly that can move at up to 5,500r/min. As this clever device combines needle and ball rolling elements, it breezes through tasks that involve radial and axial loads in one direction. It's made of strong steel, so it holds its own against bumps, abrasion and contamination.
Features & Benefits
• Light weight of 130g minimises strain on your setup
• Stamped steel cover on the ball bearing seals the grease in to ensure smooth and reliable motion
• Low cross-sectional height of 43.2mm lets you use it in tight or awkward spaces
• Needle roller bearing design minimises friction to cut wear and heat generation
• Combined unit is suitable for use in settings where a separate needle and ball bearing would take up too much space
Applications
• Agricultural equipment
• Lifts and hoists
• Automotive technology
Does this roller bearing withstand heavy loads?
Yes. The basic dynamic rating of this product is 19kN for radial forces and 19.5kN for axial ones, so it's reliable under heavy loads.
Liens connexes
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball 47 mm OD
- SKF NKX 50 Z 50 mm ID Roller Bearing Needle, 70 mm OD
- SKF NKX 70 Z 70 mm ID Roller Bearing Needle, 95 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 60 Z 60 mm ID Roller Bearing Thrust Ball 72 mm OD
- SKF NKX 20 Z 20 mm ID Roller Bearing Needle Roller 30 mm OD
- SKF NKX 12 Z 12 mm ID Roller Bearing Needle Roller 21 mm OD
- SKF NKX 40 Z 40 mm ID Roller Bearing Needle Roller 52 mm OD