Timken 32205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- N° de stock RS:
- 193-1021
- Référence fabricant:
- 32205
- Fabricant:
- Timken
Offre groupée disponible
Sous-total (1 unité)*
41,34 €
(TVA exclue)
50,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 28 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 41,34 € |
| 5 - 9 | 38,92 € |
| 10 - 24 | 38,07 € |
| 25 + | 37,29 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1021
- Référence fabricant:
- 32205
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 49.8kN | |
| Static Load Rating | 42.1kN | |
| Cup Width | 16mm | |
| Number of Rows | 1 | |
| Cone Width | 19.25mm | |
| Bearing Material | Steel | |
| End Type | Open | |
| Outside Diameter | 52mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 49.8kN | ||
Static Load Rating 42.1kN | ||
Cup Width 16mm | ||
Number of Rows 1 | ||
Cone Width 19.25mm | ||
Bearing Material Steel | ||
End Type Open | ||
Outside Diameter 52mm | ||
Bearing Type Taper | ||
- Pays d'origine :
- US
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- Timken 33205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- NTN 4T-32205R Taper Roller 25 mm ID Taper Roller Bearing, 52 mm OD
- FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF 32205 BJ2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- RS PRO 32205-B Taper 25 mm ID Roller Bearing, 52 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD
- NTN 4T-32205 Single Row Tapered Roller 25 mm ID Taper Roller Bearing, 52 mm OD