Timken 33205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- N° de stock RS:
- 193-1036
- Référence fabricant:
- 33205
- Fabricant:
- Timken
Offre groupée disponible
Sous-total (1 unité)*
34,13 €
(TVA exclue)
41,30 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 34,13 € |
| 5 - 9 | 32,14 € |
| 10 - 24 | 31,49 € |
| 25 + | 30,81 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 193-1036
- Référence fabricant:
- 33205
- Fabricant:
- Timken
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Tapered | |
| Cup Width | 18mm | |
| Static Load Rating | 63.6kN | |
| End Type | Shielded | |
| Limiting Speed | 13000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 65.4kN | |
| Number of Rows | 1 | |
| Cone Width | 22mm | |
| Outside Diameter | 52mm | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Tapered | ||
Cup Width 18mm | ||
Static Load Rating 63.6kN | ||
End Type Shielded | ||
Limiting Speed 13000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 65.4kN | ||
Number of Rows 1 | ||
Cone Width 22mm | ||
Outside Diameter 52mm | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Liens connexes
- NTN 4T-33205 Taper Roller 25 mm ID Taper Roller Bearing, 52 mm OD
- Timken 32205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- SKF 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- FAG 33205 Taper Roller 25 mm ID Tapered Roller Bearing, 52 mm OD
- RS PRO 33205 Taper 25 mm ID Roller Bearing, 52 mm OD
- Timken 30304 Taper 20 mm ID Metric Roller Bearing, 52 mm OD
- Timken 30305 Taper 25 mm ID Metric Roller Bearing, 62 mm OD