RS Better World
FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD
- N° de stock RS:
- 174-0996
- Référence fabricant:
- 32205-XL
- Fabricant:
- FAG
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
31,78 €
(TVA exclue)
38,45 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 31,78 € |
| 5 - 9 | 30,52 € |
| 10 - 24 | 29,86 € |
| 25 + | 29,22 € |
*Prix donné à titre indicatif
Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.
En savoir plus sur les produits RS Better World
- N° de stock RS:
- 174-0996
- Référence fabricant:
- 32205-XL
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Number of Rows | 1 | |
| Static Load Rating | 44500N | |
| Limiting Speed | 17500rpm | |
| Series | 322 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 40kN | |
| End Type | Open | |
| Outside Diameter | 52mm | |
| Cone Width | 19.25mm | |
| Bearing Material | Steel | |
| Better World Claim | Extended Product Life, Saves Energy | |
| Better World Product | Yes | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Number of Rows 1 | ||
Static Load Rating 44500N | ||
Limiting Speed 17500rpm | ||
Series 322 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 40kN | ||
End Type Open | ||
Outside Diameter 52mm | ||
Cone Width 19.25mm | ||
Bearing Material Steel | ||
Better World Claim Extended Product Life, Saves Energy | ||
Better World Product Yes | ||
Bearing Type Taper | ||
FAG 322 Series Roller Bearing, 25mm Inside Diameter, 52mm Outside Diameter - 32205-XL
This roller bearing is a single-row tapered component designed for rotational support in mechanical and automation systems. It accommodates axial and radial loads in assemblies where a parallel bore is required and operates at high shaft speeds for Compact rotating equipment.
Features and Benefits:
• 17,500 rpm limiting speed enables high-speed rotational applications
• 40 kN dynamic load rating supports substantial operational loads
• 44,500N static load capacity resists heavy stationary forces
• Sheet steel cage ensures guided roller retention for smooth motion
• Open-end design allows straightforward inspection and lubrication
• Parallel bore configuration simplifies shaft fitting and alignment
• 40 kN dynamic load rating supports substantial operational loads
• 44,500N static load capacity resists heavy stationary forces
• Sheet steel cage ensures guided roller retention for smooth motion
• Open-end design allows straightforward inspection and lubrication
• Parallel bore configuration simplifies shaft fitting and alignment
Applications
• Suitable for spindle units in automation machinery
• Ideal for gearbox input shafts in electrical drives
• Used with conveyor rollers in material handling systems
• Can be used for rotary encoders in electronic actuator assemblies
• Suitable for wheel hubs in Compact mechanical modules
• Ideal for gearbox input shafts in electrical drives
• Used with conveyor rollers in material handling systems
• Can be used for rotary encoders in electronic actuator assemblies
• Suitable for wheel hubs in Compact mechanical modules
What material composition affects fatigue life and wear resistance?
The bearing components are manufactured from steel, providing a balance of hardness and toughness for repeated load cycles.
How many rows of rolling elements are present and what does that imply?
It contains a single row of tapered rollers, which offers axial load support in one direction while maintaining radial load capacity.
What cage construction is used and how does it influence performance?
The rollers are retained by a sheet steel cage that maintains roller spacing and reduces internal friction during operation.
Which end configuration aids maintenance access and what is its advantage?
The open-end arrangement permits easier access for lubrication and Visual checks without disassembly.
What outside and inside dimensions are relevant for shaft and housing mating?
The bore measures 25mm for shaft fitting while the outer diameter is 52mm for housing interfacing.
Liens connexes
- NTN 4T-32205R Taper Roller 25 mm ID Roller Bearing, 52 mm OD
- Timken 32205 Taper 25 mm ID Metric Roller Bearing, 52 mm OD
- SKF 32205 BJ2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- RS PRO 32205-B Taper 25 mm ID Roller Bearing, 52 mm OD
- FAG 30205-XL Taper 25 mm ID Tapered Roller Bearing, 52 mm OD
- FAG 33205 Taper Roller 25 mm ID Tapered Roller Bearing, 52 mm OD
- FAG NU205-E-XL-TVP2 25 mm ID Roller Bearing, 52 mm OD
- FAG NJ205-E-XL-TVP2 25 mm ID Roller Bearing, 52 mm OD