FAG 32005-X-XL Taper 25 mm ID Roller Bearing, 47 mm OD
- N° de stock RS:
- 190-8367
- Référence fabricant:
- 32005-X-XL
- Fabricant:
- FAG
Offre groupée disponible
Sous-total (1 unité)*
24,01 €
(TVA exclue)
29,05 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 41 unité(s) expédiée(s) à partir du 28 avril 2026
- Plus 31 unité(s) expédiée(s) à partir du 19 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 24,01 € |
| 5 - 9 | 23,35 € |
| 10 - 24 | 22,70 € |
| 25 + | 22,12 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 190-8367
- Référence fabricant:
- 32005-X-XL
- Fabricant:
- FAG
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25 mm | |
| Bore Type | Tapered | |
| Cage Material | Sheet Steel | |
| End Type | Open | |
| Outside Diameter | 47 mm | |
| Static Load Rating | 34000N | |
| Number of Rows | 1 | |
| Cone Width | 15mm | |
| Bearing Dynamic Load Rating | 31.5 KN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Sélectionner tout | ||
|---|---|---|
Marque FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 25 mm | ||
Bore Type Tapered | ||
Cage Material Sheet Steel | ||
End Type Open | ||
Outside Diameter 47 mm | ||
Static Load Rating 34000N | ||
Number of Rows 1 | ||
Cone Width 15mm | ||
Bearing Dynamic Load Rating 31.5 KN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Liens connexes
- NTN 4T-32005X Taper Roller 25 mm ID Taper Roller Bearing, 47 mm OD
- Timken 32005X Taper 25 mm ID Metric Roller Bearing, 47 mm OD
- SKF 32005X/Q Taper 25 mm ID Roller Bearing, 47 mm OD
- RS PRO 32005 Taper 25 mm ID Metric Roller Bearing, 47 mm OD
- FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD
- FAG 30205-XL Taper 25 mm ID Tapered Roller Bearing, 52 mm OD
- FAG 32948-XL Taper Roller 240 mm ID Tapered Roller Bearing, 320 mm OD
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD