BGA123L4E6327XTSA1 Infineon RF Amplifier Low Noise 18.2 dB, 4-Pin 1615 MHz TSLP
- N° de stock RS:
- 258-0652
- Référence fabricant:
- BGA123L4E6327XTSA1
- Fabricant:
- Infineon
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 paquet de 10 unités)*
3,76 €
(TVA exclue)
4,55 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 14 430 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 90 | 0,376 € | 3,76 € |
| 100 - 240 | 0,358 € | 3,58 € |
| 250 - 490 | 0,342 € | 3,42 € |
| 500 - 990 | 0,328 € | 3,28 € |
| 1000 + | 0,304 € | 3,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 258-0652
- Référence fabricant:
- BGA123L4E6327XTSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Amplifier Type | Low Noise | |
| Operating Frequency | 1615 MHz | |
| Product Type | RF Amplifier | |
| Technology | Silicon Germanium | |
| Gain | 18.2dB | |
| Minimum Supply Voltage | 1.1V | |
| Package Type | TSLP | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 4 | |
| Noise Figure | 0.75dB | |
| Third Order Intercept OIP3 | -14dBm | |
| Minimum Operating Temperature | -40°C | |
| P1dB - Compression Point | -17dBm | |
| Maximum Operating Temperature | 85°C | |
| Height | 0.31mm | |
| Width | 0.7 mm | |
| Standards/Approvals | JEDEC47/20/22 | |
| Length | 0.7mm | |
| Series | BGA123L4 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Amplifier Type Low Noise | ||
Operating Frequency 1615 MHz | ||
Product Type RF Amplifier | ||
Technology Silicon Germanium | ||
Gain 18.2dB | ||
Minimum Supply Voltage 1.1V | ||
Package Type TSLP | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 4 | ||
Noise Figure 0.75dB | ||
Third Order Intercept OIP3 -14dBm | ||
Minimum Operating Temperature -40°C | ||
P1dB - Compression Point -17dBm | ||
Maximum Operating Temperature 85°C | ||
Height 0.31mm | ||
Width 0.7 mm | ||
Standards/Approvals JEDEC47/20/22 | ||
Length 0.7mm | ||
Series BGA123L4 | ||
Automotive Standard No | ||
The Infineon small footprint ultra low current low noise amplifier is designed to enhance GNSS signal sensitivity especially in wearables and mobile cellular IoT devices.
With 18.2 dB gain and only 0.75 dB noise figure it ensures high system sensitivity. The current needed is only 1.1 mA which means just 1.3 mW power consumption, which is critical to help to conserve batteries. The wide supply voltage range of 1.1 V to 3.6 V ensures flexible design and high compatibility.
Ultra low current consumption of 1.1 mA
Wide supply voltage range of 1.1 V to 3.6 V
High insertion power gain of 18.2 dB
Low noise figure of 0.75 dB
2 kV HBM ESD protection
Liens connexes
- Infineon RF Amplifier Low Noise 18.2 dB, 4-Pin 1615 MHz TSLP
- Infineon RF Amplifier Low Noise 20 dB, 6-Pin 1615 MHz TSLP
- BGA725L6E6327FTSA1 Infineon RF Amplifier Low Noise 20 dB, 6-Pin 1615 MHz TSLP
- Infineon RF Amplifier Low Noise 21.2 dB, 6-Pin 1615 MHz TSNP
- Infineon RF Amplifier Low Noise 31.5 dB 5.6 GHz TSLP-7-1
- BGA123N6E6327XTSA1 Infineon RF Amplifier Low Noise 21.2 dB, 6-Pin 1615 MHz TSNP
- BGB707L7ESDE6327XTSA1 Infineon RF Amplifier Low Noise 31.5 dB 5.6 GHz TSLP-7-1
- Infineon RF Amplifier Low Noise 22.2 dB, 6-Pin 1300MHz TSNP