Eaton RCD, 25A, 2 Pole, 30mA, Type C, 230V
- N° de stock RS:
- 922-8743
- Référence fabricant:
- 236279 PKNM-25/1N/C/003-A-MW
- Fabricant:
- Eaton
Sous-total (1 unité)*
159,86 €
(TVA exclue)
193,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 11 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 159,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 922-8743
- Référence fabricant:
- 236279 PKNM-25/1N/C/003-A-MW
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Circuit Breaker Type | RCD | |
| Current Rating | 25A | |
| Number of Poles | 2 | |
| Range | PKNM | |
| Trip Sensitivity | 30mA | |
| Tripping Characteristics | Type C | |
| Voltage Rating | 230V | |
| Standards Met | CE | |
| Earth Leakage Protection Type | A | |
| Reset Actuator Type | Toggle Switch | |
| Overall Dimensions | 35 x 65.5 x 80mm | |
| Breaking Capacity at Maximum Voltage Rating | 10 kA | |
| Break Time | Instantaneous | |
| Overall Length | 35mm | |
| Terminal Contact Type | Screw | |
| Overall Depth | 80mm | |
| Overall Width | 65.5mm | |
| Mounting Style | DIN Rail Mount | |
| Rated AC Voltage | 230V | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Circuit Breaker Type RCD | ||
Current Rating 25A | ||
Number of Poles 2 | ||
Range PKNM | ||
Trip Sensitivity 30mA | ||
Tripping Characteristics Type C | ||
Voltage Rating 230V | ||
Standards Met CE | ||
Earth Leakage Protection Type A | ||
Reset Actuator Type Toggle Switch | ||
Overall Dimensions 35 x 65.5 x 80mm | ||
Breaking Capacity at Maximum Voltage Rating 10 kA | ||
Break Time Instantaneous | ||
Overall Length 35mm | ||
Terminal Contact Type Screw | ||
Overall Depth 80mm | ||
Overall Width 65.5mm | ||
Mounting Style DIN Rail Mount | ||
Rated AC Voltage 230V | ||
- Pays d'origine :
- RO
Eaton RCD, DIN Rail Mounting, Screw Terminals - PKNM Series - 236279 PKNM-25/1N/C/003-A-MW
Install this RCD from Eaton to stay safe from electric shocks caused by current leakage. With its type-C tripping characteristics, it allows inrush currents sufficient to start up equipment but will trip instantaneously if its 25A current rating is exceeded by five to ten times. Trip sensitivity of 30mA means it springs into action even when the current leakage is very small. That makes it ideal for guarding against ground faults in residential settings or small commercial operations such as B&Bs or doctors' surgeries. Once you've found and rectified a fault, resetting the RCD is a simple matter of flicking the toggle switch.
Features & Benefits
• DIN rail mounting style to help you build an organised system
• Red and green contact position indicators for easy monitoring
• Screw-terminal method for vibration-resistant connections
• Single-pole plus neutral configuration protects both the phase and neutral conductors in single-phase loads
• Red and green contact position indicators for easy monitoring
• Screw-terminal method for vibration-resistant connections
• Single-pole plus neutral configuration protects both the phase and neutral conductors in single-phase loads
What equipment can I make safe with a 25A RCD?
A 25A RCD is a versatile option that's the ideal protector to install in circuits powering everything from IT hardware and heating systems to outdoor lighting and power tools in small workshops.
Note
Eaton formerly known as Moeller