Eaton RCD, 20A, 2 Pole, 30mA, Type C, 230V
- N° de stock RS:
- 922-8737
- Référence fabricant:
- 236249 PKNM-20/1N/C/003-A-MW
- Fabricant:
- Eaton
Sous-total (1 unité)*
155,99 €
(TVA exclue)
188,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 155,99 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 922-8737
- Référence fabricant:
- 236249 PKNM-20/1N/C/003-A-MW
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Circuit Breaker Type | RCD | |
| Current Rating | 20A | |
| Number of Poles | 2 | |
| Range | PKNM | |
| Trip Sensitivity | 30mA | |
| Tripping Characteristics | Type C | |
| Voltage Rating | 230V | |
| Standards Met | CE | |
| Break Time | Instantaneous | |
| Earth Leakage Protection Type | A | |
| Breaking Capacity at Maximum Voltage Rating | 10 kA | |
| Reset Actuator Type | Toggle Switch | |
| Overall Dimensions | 35 x 65.5 x 80mm | |
| Mounting Style | DIN Rail Mount | |
| Rated AC Voltage | 230V | |
| Overall Depth | 80mm | |
| Overall Length | 35mm | |
| Terminal Contact Type | Screw | |
| Overall Width | 65.5mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Circuit Breaker Type RCD | ||
Current Rating 20A | ||
Number of Poles 2 | ||
Range PKNM | ||
Trip Sensitivity 30mA | ||
Tripping Characteristics Type C | ||
Voltage Rating 230V | ||
Standards Met CE | ||
Break Time Instantaneous | ||
Earth Leakage Protection Type A | ||
Breaking Capacity at Maximum Voltage Rating 10 kA | ||
Reset Actuator Type Toggle Switch | ||
Overall Dimensions 35 x 65.5 x 80mm | ||
Mounting Style DIN Rail Mount | ||
Rated AC Voltage 230V | ||
Overall Depth 80mm | ||
Overall Length 35mm | ||
Terminal Contact Type Screw | ||
Overall Width 65.5mm | ||
- Pays d'origine :
- RO
Eaton RCD, Contact Position Indicator, DIN Rail Mounting - PKNM Series - 236249 PKNM-20/1N/C/003-A-MW
Stop electrical hazards in their tracks with this RCD from Eaton. A trip sensitivity of 30mA means it protects personnel from even very small current leakages. This makes it ideal for safeguarding against ground faults in settings such as care homes, offices and shops. Type-C tripping characteristics permit loads that need an inrush current to work properly, but the device will trip instantly if the current exceeds five to ten times its 20A rating. As you can mount this RCD on a DIN rail, installation is done in a flash.
Features & Benefits
• Rated voltage of 230V AC for compatibility with the UK mains supply
• Red and green contact position indicators let you check on status at a glance
• Screw terminals help you make quick and secure electrical connections
• Toggle switch allows you to quickly re-energise the circuit once the fault is identified and fixed
• Red and green contact position indicators let you check on status at a glance
• Screw terminals help you make quick and secure electrical connections
• Toggle switch allows you to quickly re-energise the circuit once the fault is identified and fixed
How many poles does this RCD have?
This RCD is a single-pole plus neutral device. It offers a suitable level of protection for houses and small commercial premises where a single-phase system is used.
Note
Eaton formerly known as Moeller