Eaton PKNM Series Residual Current Device, 10A, 2-Pole, 30 mA, Type C, 10 kA 230V ac

Voir l’ensemble des RCCBs

Sous-total (1 unité)*

159,86 €

(TVA exclue)

193,43 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 3 unité(s) prête(s) à être expédiée(s)
  • Plus 182 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 12 unité(s) expédiée(s) à partir du 24 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +159,86 €

*Prix donné à titre indicatif

N° de stock RS:
922-8715
Numéro d'article Distrelec:
300-42-688
Référence fabricant:
236082 PKNM-10/1N/C/003-A-MW
Fabricant:
Eaton
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Eaton

Product Type

Residual Current Device

Current Rating

10A

Number of Poles

2

Range

PKNM

Series

PKNM

Trip Sensitivity

30mA

Tripping Characteristics

Type C

Mount Type

DIN Rail

Standards/Approvals

CE

Terminal Type

Screw

Height

80mm

Depth

70.5mm

Width

70mm

Breaking Capacity

10kA

Break Time

Instantaneous

Earth Leakage Protection Type

Type A

Reset Actuator Type

Toggle Switch

Application

Industrial

Rated AC Voltage

230V ac

Tripping Mechanism

Electromagnetic

Pays d'origine :
RO

Eaton RCD, Screw Terminals, Front Toggle Switch - PKNM Series - 236082 PKNM-10/1N/C/003-A-MW


Keep your people safe from electric shocks with this RCD from Eaton. Its type-C tripping characteristics make it suitable for protecting more powerful motors. If the current exceeds two to five times the rated load, the unit will trip and shut off the power before any damage can be done. Once you've found and rectified the fault, simply flick the toggle switch to reset the RCD and get up and running again.

Features & Benefits


• Screw terminals help you quickly make secure electrical connections

• Red and green contact position indicators let you check the status at a glance

• Single-pole plus neutral configuration means it protects both the phase and neutral conductors in single-phase loads such as lighting

• 10A current rating to protect circuits with the same input

What's the difference between an RCD and an MCB?


An RCD (residual current device) is a safety device that detects and disconnects power when it senses a leakage of current. An MCB (miniature circuit breaker) is designed to protect circuits from overcurrents and short circuits by interrupting the flow of current. While both enhance electrical safety, an RCD focuses on keeping people safe rather than protecting the circuit.

Note

Eaton formerly known as Moeller

Liens connexes